Official GIGABYTE Forum

Cool n Quiet and MA770-UD3 while overclocking

JacoX

  • 8
  • 0
Cool n Quiet and MA770-UD3 while overclocking
« on: October 01, 2009, 12:02:17 am »
Hello

I´ve overclocked my X3 720BE to 3.2 trough the multi , 16X, but i cannot have CnQ working properly.
It is enabled in the bios, but the OS, WIN 7, does not have the option available, leaving the CPU running at 3.2 at all times.

So is it possible to have OC and CnQ enabled by any way?

Many Thanks

« Last Edit: October 01, 2009, 09:26:51 am by runn3R »

runn3R

  • *
  • 1328
  • 57
  • Admin
    • GIGABYTE UK
Re: Cool n Quiet and MA770-UD3 while overclocking
« Reply #1 on: October 01, 2009, 09:37:09 am »
Hi

I don't think that this will work as CnQ requires CPU not to be full loaded. And if you overclock it then it's even overloaded.

Just try with default CPU settings to check if CnQ will work or not.

and remember not to select “Performance” on Win 7 power management scheme setting as it disables CnQ
ZX-S & C64 are still my favourites ;-)

JacoX

  • 8
  • 0
Re: Cool n Quiet and MA770-UD3 while overclocking
« Reply #2 on: October 01, 2009, 10:38:19 am »
Thanks for the reply.
With stock speed CnQ works even with performance power management  setting enabled.
I´l try to choose another power setting and see if iti works.

runn3R

  • *
  • 1328
  • 57
  • Admin
    • GIGABYTE UK
Re: Cool n Quiet and MA770-UD3 while overclocking
« Reply #3 on: October 01, 2009, 11:12:39 am »
Welcomed :)

(...)
With stock speed CnQ works even with performance power management  setting enabled. (...)
that's interesting
ZX-S & C64 are still my favourites ;-)

JacoX

  • 8
  • 0
Re: Cool n Quiet and MA770-UD3 while overclocking
« Reply #4 on: October 01, 2009, 05:40:13 pm »
Welcomed :)

(...)
With stock speed CnQ works even with performance power management  setting enabled. (...)
that's interesting

Thank you:)

So any idea  if  that it´s an OS limitation/config or in fact t OC and CnQ is a no go?
Many thanks

Badbonji

  • 356
  • 13
Re: Cool n Quiet and MA770-UD3 while overclocking
« Reply #5 on: October 01, 2009, 06:00:58 pm »
What are you using to check? CPU-z?
Core i7 965 @ 4.35Ghz 1.37Vcore
6Gb G.Skill 1600Mhz DDR3 @ 1740Mhz 8-8-8-20 1T
HIS HD5970 @ 800/1100
Gigabyte Extreme X58
X-Fi Xtreme Gamer Fatal1ty
256GB M4 + 150GB Raptor
EK Supreme HF/GTX480/MCP655/EK Res :D

JacoX

  • 8
  • 0
Re: Cool n Quiet and MA770-UD3 while overclocking
« Reply #6 on: October 01, 2009, 07:40:39 pm »
Yes i´m using cpu-z.
Should i use another?

Badbonji

  • 356
  • 13
Re: Cool n Quiet and MA770-UD3 while overclocking
« Reply #7 on: October 02, 2009, 07:57:58 am »
So it never clocks down no matter what load? Is the BIOS up to date? I am not that familiar with AMD systems but I guess it is the equivalent of Intel Speedstep, and that works with overclocks.
Core i7 965 @ 4.35Ghz 1.37Vcore
6Gb G.Skill 1600Mhz DDR3 @ 1740Mhz 8-8-8-20 1T
HIS HD5970 @ 800/1100
Gigabyte Extreme X58
X-Fi Xtreme Gamer Fatal1ty
256GB M4 + 150GB Raptor
EK Supreme HF/GTX480/MCP655/EK Res :D

JacoX

  • 8
  • 0
Re: Cool n Quiet and MA770-UD3 while overclocking
« Reply #8 on: October 02, 2009, 09:42:50 am »
So it never clocks down no matter what load? Is the BIOS up to date? I am not that familiar with AMD systems but I guess it is the equivalent of Intel Speedstep, and that works with overclocks.

That´s correct. Its  at 3.2 always. With the default speed, 2.8, it clocks down and up according to the load.
I have the latest bios, and if i OC it , in the power management setting the processor management tab does not display the minimum processor  state and maximum.

Re: Cool n Quiet and MA770-UD3 while overclocking
« Reply #9 on: October 16, 2009, 04:00:47 am »
So it never clocks down no matter what load? Is the BIOS up to date? I am not that familiar with AMD systems but I guess it is the equivalent of Intel Speedstep, and that works with overclocks.

That´s correct. Its  at 3.2 always. With the default speed, 2.8, it clocks down and up according to the load.
I have the latest bios, and if i OC it , in the power management setting the processor management tab does not display the minimum processor  state and maximum.


Hi!
I'm from Brazil. Forgive for my poor English, ok?

I Have the same trouble with my new GA-MA785GMT-UD2H.
If i use in AUTO multiplier CnQ is ok.
If i put other multiplier CnQ don't function.
If i boot in stock then i increase the multiplier with Gigabyte EasyTune, CnQ functions perfectly.

I have the lastest BIOS (F3)
CPU is Phenom II X2 550BE
Mem is OCZ 2x2GB DDR3-1600 7-7-7-24   1,65V(stock voltage)
OS is Win 7 RC7100, but in XP i have the same trouble.

Tks.
Gigabyte GA-Z97-D3H | Core i3 4360 | Corsair Vegeance Pro 2x4GB DDR3-2133 11-11-11-24

Re: Cool n Quiet and MA770-UD3 while overclocking
« Reply #10 on: October 21, 2009, 01:55:11 pm »
So it never clocks down no matter what load? Is the BIOS up to date? I am not that familiar with AMD systems but I guess it is the equivalent of Intel Speedstep, and that works with overclocks.

That´s correct. Its  at 3.2 always. With the default speed, 2.8, it clocks down and up according to the load.
I have the latest bios, and if i OC it , in the power management setting the processor management tab does not display the minimum processor  state and maximum.


Hi!
I'm from Brazil. Forgive for my poor English, ok?

I Have the same trouble with my new GA-MA785GMT-UD2H.
If i use in AUTO multiplier CnQ is ok.
If i put other multiplier CnQ don't function.
If i boot in stock then i increase the multiplier with Gigabyte EasyTune, CnQ functions perfectly.

I have the lastest BIOS (F3)
CPU is Phenom II X2 550BE
Mem is OCZ 2x2GB DDR3-1600 7-7-7-24   1,65V(stock voltage)
OS is Win 7 RC7100, but in XP i have the same trouble.

Tks.

Nobody?
Gigabyte GA-Z97-D3H | Core i3 4360 | Corsair Vegeance Pro 2x4GB DDR3-2133 11-11-11-24

runn3R

  • *
  • 1328
  • 57
  • Admin
    • GIGABYTE UK
Re: Cool n Quiet and MA770-UD3 while overclocking
« Reply #11 on: October 23, 2009, 10:44:06 am »
Yes, Cool n Quiet does not work while overclocking CPU multiplier in Bios. That's limitation
ZX-S & C64 are still my favourites ;-)

Re: Cool n Quiet and MA770-UD3 while overclocking
« Reply #12 on: October 28, 2009, 12:51:35 pm »
Yes, Cool n Quiet does not work while overclocking CPU multiplier in Bios. That's limitation
Limitation of this model or all models of Gigabyte?
Some users of ForumPCS from Brazil (www.forumpcs.com.br) tested this in other Gigabyte model and it function correctly (boost multiplier with Cool n'Quiet active), and with others manufacturers like as ASUS and it be ok too. Why only in my Gigabyte model?
Gigabyte GA-Z97-D3H | Core i3 4360 | Corsair Vegeance Pro 2x4GB DDR3-2133 11-11-11-24

runn3R

  • *
  • 1328
  • 57
  • Admin
    • GIGABYTE UK
Re: Cool n Quiet and MA770-UD3 while overclocking
« Reply #13 on: November 10, 2009, 11:41:45 am »
Cool and Quiet is disabled when you change the cpu multipliers under Gigabyte mb's bios.

If you want C & Q to work with changed cpu multiplier you can use our EasyTune software to adjust cpu multiplier (not through bios).
ZX-S & C64 are still my favourites ;-)

Re: Cool n Quiet and MA770-UD3 while overclocking
« Reply #14 on: November 13, 2009, 11:18:18 pm »
Well, my Phenom II X4 950 BE is running with a x17.5 multiplier (@3,5 Ghz) and Cool and Quiet is working with a x4 multiplier by default
It is a GA-MA770-UD3-V2.
The multiplier has been changed into EasyTune 6 and not in the bios.
Windows 7 RC has not been tuned (i.e:power mode) since the first install.

If I have some time, I will try to go higher in frequency. :)


Ps: this motherboard is very nice, but not the serial port (crazy pinout) and not the AMD raid setting (never succeeded to make it work).