Official GIGABYTE Forum

Please forgive my ignorance : GA-990FXA-UD3

Please forgive my ignorance : GA-990FXA-UD3
« on: September 14, 2011, 09:55:09 pm »
I am brand new to the pc world, have been a console gamer all my life and decided it was time to make the switch. I purchased a gaming pc that is far from that. With advice from other forums and a limited budget I decided to build my own, and since this is my first build I'm a little unsure about drivers.
I've watched a ton of videos on how to build them, but I can't seem to get a straight answer as far as the drivers.
My question is, I know I have install the drivers for Chipset, Network, USB, Audio and Video Card, but what about these, they are all in the Gigabyte downloads page and I have no idea what they are for.

Marvell 9128 AHCI/RAID driver
Marvell RAID Driver
Marvell AHCI Driver
AMD SATA RAID/AHCI Driver (Preinstall driver, press F6 during Windows* setup to read from floppy)
OS:Windows XP 32bit,Windows XP 64bit

And are there any more I need to install?

This is my setup:

GIGABYTE GA-990FXA-UD3 AM3+ AMD 990FX SATA 6Gb/s USB 3.0 ATX AMD Motherboard
G.skill Ripjaws X Series 16gb (4 X 4gb) 240-pin Ddr3 Sdram Ddr3 1600 (Pc3 12800) Desktop Memory Model F3-12800cl9q-16gbxl
Phenom II X4 980 3.70 GHz Processor - Socket AM3 PGA-938
XFX HD-695X-CNDC Radeon HD 6950 2GB 256-bit GDDR5 PCI Express 2.1 x16 HDCP Ready CrossFireX Support Video Card with Eyefinity
PC Power and Cooling Silencer Mk II 950W High Performance 80PLUS Silver SLI CrossFire ready Power Supply
COOLER MASTER Storm Scout SGC-2000-KKN1-GP Black Steel / Plastic ATX Mid Tower Computer Case
NZXT Sentry-2 5.25" Touch Screen fan controller
2-Seagate Barracuda ST31000524AS 1TB 7200 RPM SATA 6.0Gb/s 3.5" Internal Hard Drive -Bare Drive
3-APEVIA CF12SL-UBL 120mm Blue LED Case Fan
2-Apevia CF14SL-BBL 140mm Case
Cooler Master Hyper 212 Plus 120mm Sleeve CPU Cooler, RR-B10_212P-G1

Any help is greatly appreciated as I am ready to build but don't want to start until I am 100% sure of myself.

Thank you,

Jay
« Last Edit: September 14, 2011, 10:04:25 pm by Importz2k1 »

Dark Mantis

  • *
  • 18405
  • 414
  • 10typesofpeopleoneswhoknow binaryandoneswhodont
    • Dark Mantis
Re: Please forgive my ignorance : GA-990FXA-UD3
« Reply #1 on: September 15, 2011, 07:37:47 am »
Hi and welcome to the Gigabyte Forum.

Congratulations on your first build. For now don't worry installing anything that has RAID in it. That is just a way oif configuring more than one hard drive to work together for more performance. I won't explain any more than that at the moment for fear of confusing you further.

Configure you drives as IDE mode and they should be fine.
Gigabyte X58A-UD7
i7 920
Dominators 1600 x6 12GB
6970 2GB
HX850
256GB SSD, Sam 1TB, WDB320GB
Blu-Ray
HAF 932

Gigabyte Z68X-UD5-B3
i7 3770K
Vengeance 1600 16GB
6950 2GB
HCP1200W
Revo Drive x2, 1.5TB WDB RAID0
16x DLRW
StrikeX S7
Full water cooling
3 x 27" Iiy