Official GIGABYTE Forum

Multiplier up/down when being locked

Aussie Allan

  • 1964
  • 141
  • A yoyo uses all three fundermental laws of phisics
Re: Multiplier up/down when being locked
« Reply #15 on: October 04, 2011, 12:03:59 pm »


      Am I correct when I say these min/max temps are in Idle loads ?

  Aussie Allan
i7-4790K @4.8GHz 24/7 water clock
MSI XPower AC
32GB corsair  2666Mhz
 GTX-1070Ti full cover
Lange DDC elite pump
G changer360 Rad x2
Phobya 450 balancer
W10 Pro-64
Zigor 2000 UPS
1x500GB for clone
6x2tb- raid5-Storage
C: Evo 970 Pro 512gb
Scratch:Evo 970 Plus 512gb

Saldo

  • 24
  • 0
Re: Multiplier up/down when being locked
« Reply #16 on: October 04, 2011, 12:51:05 pm »
You are correct.

These are min and max temps.

Dark Mantis

  • *
  • 18405
  • 414
  • 10typesofpeopleoneswhoknow binaryandoneswhodont
    • Dark Mantis
Re: Multiplier up/down when being locked
« Reply #17 on: October 04, 2011, 01:28:25 pm »
I would say the temperatures are a little on the high side for idle rates. Have you got plenty of case cooling ?
Gigabyte X58A-UD7
i7 920
Dominators 1600 x6 12GB
6970 2GB
HX850
256GB SSD, Sam 1TB, WDB320GB
Blu-Ray
HAF 932

Gigabyte Z68X-UD5-B3
i7 3770K
Vengeance 1600 16GB
6950 2GB
HCP1200W
Revo Drive x2, 1.5TB WDB RAID0
16x DLRW
StrikeX S7
Full water cooling
3 x 27" Iiy

Saldo

  • 24
  • 0
Re: Multiplier up/down when being locked
« Reply #18 on: October 04, 2011, 03:40:19 pm »
My case has a radiator with 3x 120mm fan , placed in the fornt door and I always leave it open, so no hot air gets into the case.

Beside that there are :
- 1x 120mm front fan
- 1x 120mm rear fan
- 1x  80 mm rear fan
- 1x  80 mm top fan

Also the psu sucks air from the case.

Case temp is around 28-34 C.

Saldo

  • 24
  • 0
Re: Multiplier up/down when being locked
« Reply #19 on: October 06, 2011, 07:03:47 pm »
After 2 days of waiting a new CPU i2600k arrived today.

Any advice on starting again with oc ?



Aussie Allan

  • 1964
  • 141
  • A yoyo uses all three fundermental laws of phisics
Re: Multiplier up/down when being locked
« Reply #20 on: October 06, 2011, 08:01:13 pm »

  Saldo

  The best advise I can give you or anyone wanting to get the best out of a given system..... is establish a stock setting base-line

  everything set to standard/auto ..... record everything you can .....idle and load! .... temps, benchmarks, the lot.

 this will give you valuable data to work from..... and let you know if your present cooling system is up to the challenge.

  Aussie Allan
i7-4790K @4.8GHz 24/7 water clock
MSI XPower AC
32GB corsair  2666Mhz
 GTX-1070Ti full cover
Lange DDC elite pump
G changer360 Rad x2
Phobya 450 balancer
W10 Pro-64
Zigor 2000 UPS
1x500GB for clone
6x2tb- raid5-Storage
C: Evo 970 Pro 512gb
Scratch:Evo 970 Plus 512gb

Saldo

  • 24
  • 0
Re: Multiplier up/down when being locked
« Reply #21 on: October 08, 2011, 10:56:19 am »
Today I placed the new CPU.
Over these couple of days I placed a 25cm sidefan in the case door.

I A couple of years ago Thermaltake sold replacement doors with a 25cm fan fopr extra case cooling.
It now look the same as the TT version.

Temp results without manually oc :
CPU temp idle 28C instead of 33.
CPU package temp idle 34C instead of 38C
Case temp 24 C instead of 28.  


Just did a test at 4.8 Ghz with FSX.
Everything is running perfectly.
Vcore is 1.4 ( 1.39 was just to little when setting the memory to it's default 2133 instead of 1866 ).

Way better than before.


Btw : why is cpu package temp higher than the highest core temp ?
 
  
« Last Edit: October 08, 2011, 01:39:36 pm by Saldo »

 

anything