Official GIGABYTE Forum

Front Panel module for GA-H55N-usb3

Front Panel module for GA-H55N-usb3
« on: October 20, 2011, 01:00:53 pm »
My first post, hope i'm in the right area. I am fitting the GA- H55N-USB3 in a Shuttle case which has a Daughterboard fitted. Can I buy a similar module to replace the existing one.?which would be accomodated by my Motherboard.
Tks ..... Frankie

Dark Mantis

  • *
  • 18405
  • 414
  • 10typesofpeopleoneswhoknow binaryandoneswhodont
    • Dark Mantis
Re: Front Panel module for GA-H55N-usb3
« Reply #1 on: October 20, 2011, 06:14:36 pm »
Hi and welcome to the Gigabyte Forum.

It might help me to answer your query if you could explain exactly what this daughterboard did and where it connects to ?
Gigabyte X58A-UD7
i7 920
Dominators 1600 x6 12GB
6970 2GB
HX850
256GB SSD, Sam 1TB, WDB320GB
Blu-Ray
HAF 932

Gigabyte Z68X-UD5-B3
i7 3770K
Vengeance 1600 16GB
6950 2GB
HCP1200W
Revo Drive x2, 1.5TB WDB RAID0
16x DLRW
StrikeX S7
Full water cooling
3 x 27" Iiy

Re: Front Panel module for GA-H55N-usb3
« Reply #2 on: October 20, 2011, 06:45:50 pm »
Tks for reply, the daughterboard which has connections for a 4-1 card reader,usb 2.0, mic/headphone jacks & e-Sata/usb combo, connected to a bottom front panel. The board itself connects to a socket on the MB by a fine ribbon cable.

Dark Mantis

  • *
  • 18405
  • 414
  • 10typesofpeopleoneswhoknow binaryandoneswhodont
    • Dark Mantis
Re: Front Panel module for GA-H55N-usb3
« Reply #3 on: October 21, 2011, 03:10:31 pm »
It doesn't sound like it will fit a standard ATX motherboard unless the ribbon cable connects to the USB etc motherboard headers. Maybe you can make a set of plugs to enable conection to the various headers on the motherboard and just use the necessary ones. Time consuming but quite possible to do.
Gigabyte X58A-UD7
i7 920
Dominators 1600 x6 12GB
6970 2GB
HX850
256GB SSD, Sam 1TB, WDB320GB
Blu-Ray
HAF 932

Gigabyte Z68X-UD5-B3
i7 3770K
Vengeance 1600 16GB
6950 2GB
HCP1200W
Revo Drive x2, 1.5TB WDB RAID0
16x DLRW
StrikeX S7
Full water cooling
3 x 27" Iiy

Re: Front Panel module for GA-H55N-usb3
« Reply #4 on: October 21, 2011, 04:20:27 pm »
Tks for that, I agree not really worth the bother. I will probably replace it with a similar composite panel to fit the 110 x 18mm slot  on the case. Any suggestions would be appreciated.

Dark Mantis

  • *
  • 18405
  • 414
  • 10typesofpeopleoneswhoknow binaryandoneswhodont
    • Dark Mantis
Re: Front Panel module for GA-H55N-usb3
« Reply #5 on: October 22, 2011, 08:52:43 am »
If you can post a link to the case in question along with the daughterboard I will see if I can help out at all.
Gigabyte X58A-UD7
i7 920
Dominators 1600 x6 12GB
6970 2GB
HX850
256GB SSD, Sam 1TB, WDB320GB
Blu-Ray
HAF 932

Gigabyte Z68X-UD5-B3
i7 3770K
Vengeance 1600 16GB
6950 2GB
HCP1200W
Revo Drive x2, 1.5TB WDB RAID0
16x DLRW
StrikeX S7
Full water cooling
3 x 27" Iiy

Re: Front Panel module for GA-H55N-usb3
« Reply #6 on: October 22, 2011, 12:22:53 pm »
http://uk.shuttle.com/main/productsDetail?productId=1409           is the link to the SH55j2 . If you don't mind I have attached a pic showing the front module (daughterboard) detached from the case and attached to the Shuttle board. When the Gigabyte Mini is fitted it only occupies about half the space. Tks for your interest and help. 

Dark Mantis

  • *
  • 18405
  • 414
  • 10typesofpeopleoneswhoknow binaryandoneswhodont
    • Dark Mantis
Re: Front Panel module for GA-H55N-usb3
« Reply #7 on: October 22, 2011, 12:49:35 pm »
I have had a look at them all and in my opinion the only way it would be possible is to make the wiring loom yourself. Sorry. :-\
Gigabyte X58A-UD7
i7 920
Dominators 1600 x6 12GB
6970 2GB
HX850
256GB SSD, Sam 1TB, WDB320GB
Blu-Ray
HAF 932

Gigabyte Z68X-UD5-B3
i7 3770K
Vengeance 1600 16GB
6950 2GB
HCP1200W
Revo Drive x2, 1.5TB WDB RAID0
16x DLRW
StrikeX S7
Full water cooling
3 x 27" Iiy

Re: Front Panel module for GA-H55N-usb3
« Reply #8 on: October 22, 2011, 01:19:49 pm »
Too complicated for me so I will just try and find some sort of a replacement to fit in the hole on the case front. Thank you for your assistance and suggestion.

Dark Mantis

  • *
  • 18405
  • 414
  • 10typesofpeopleoneswhoknow binaryandoneswhodont
    • Dark Mantis
Re: Front Panel module for GA-H55N-usb3
« Reply #9 on: October 22, 2011, 03:21:07 pm »
Well if I can help further please post back. Good luck with your searching. ;)
Gigabyte X58A-UD7
i7 920
Dominators 1600 x6 12GB
6970 2GB
HX850
256GB SSD, Sam 1TB, WDB320GB
Blu-Ray
HAF 932

Gigabyte Z68X-UD5-B3
i7 3770K
Vengeance 1600 16GB
6950 2GB
HCP1200W
Revo Drive x2, 1.5TB WDB RAID0
16x DLRW
StrikeX S7
Full water cooling
3 x 27" Iiy