G1-Guerrilla MIT BIOS question

[G1KLR]

Hi

I’ve got a G1-Guerrilla running the F2 Bios and I’ve noticed that:

1) My usb keyboard and Mouse (the backlit lighting) goes on and off when I go into the M.I.T. screen of the BIOS. I’ve noticed when the screen refreshes itself (updates the mobo readings) that’s when the keyboard and mouse flashes on and off every few seconds. Every other section/screen of the BIOS no issues. Is this normal? Running Logitec G510 keyboard and Razer Mamba mouse. Plugged into the usb 2 slots next to the Network/LAN slot. I can navigate through the M.I.T section with no problems, but just wondering is the backlit flashing normal.

2) Running Corsair 12GB Dominator DHX (3x4GB), PC-12800 (1600MHz) DDR3, 9-9-9-24 – and I configured the memory profile to XMP profile 1 so it runs @ 1600MHz. It shows this in the Memory screen. In the M.I.T. screen it shows that it is running at 1599.xxMHz. Is this right?

The BIOS is set to Optimal settings.

Any help to clarify this would be much appreciated.

Cheers

[Dark Mantis]

Hi and welcome.


It seems to me like you are just looking for problems. If everything is working as it should, which I suspect that it is, then just enjoy using your toy rather than worrying about things that are inconsequential. I, personally, can't say if the particular keyboard and mouse combination you are using does that as per spec but I doubt that there is anything wrong merely an indication of the system refreshing itself.

[{dz}]

hi,i have same problem,with a cyborg v7 keyboard and i also have a razer mamba 2012 mouse,mit sreen reloads itself every 2-3 seconds,but you cant navigate bios as keybord powers on and off,switched to a old keyboard with ps/2 port to navigate bios screenwith no problems,also have f2 bios,i see a new update to bios has been released i might try that and see if i have same problem.