Gigabyte H55M-D2H

[Gloup_Gloup]

Your replies are very short and not very helpful.. Would be better if you were more in depth with your responses and we'd be able to target the issue...

Hi MiiCK,  

I see that you are involved in the forum. Good initiative...  

It is a pleasure to see new members (at least not very old) involved.
Sometimes a situation of requesting assistance, each person to answer in his own experience and knowledge.
So it helps the entire community of persons who have hardware from Gigabyte.

Concern that Gatuso not seem to respond with enthusiasm or with more information ...
I can understand that it is discouraged and try to put off solving the problem computer.

This time of year, is not always fun for everyone.
Sometimes it's even painful ...
There is not just hardware but mourning of people or animals.

So wait and see from Gatuso... In any case we are not here to twist his arm ...

Gloup_Gloup

[Gatuso]

Sorry if it seams bit harsh but i cant belive that new components dont work with it...

[Gloup_Gloup]

Sorry if it seams bit harsh but i cant belive that new components dont work with it...

Hi Gatuso, 

I understand your disappointment.

If we take from the beginning ...

For example, you said the first message that the cpu was used. From where did he come from? You, your friend, or otherwise?

Tell us also or just the rest of the hardware.

Basically, I want to know what is the trusted in quality can have on worn components.

Gloup_Gloup

[Gatuso]

Ok, cpu i3 540 used for 6 months, working..
Mobo new in wrap
Psu used, stilk working...
Hdd used, still working
Dvd used, still working
Ram new

[Gloup_Gloup]

Ok, cpu i3 540 used for 6 months, working..
Mobo new in wrap
Psu used, stilk working...
Hdd used, still working
Dvd used, still working
Ram new

Hi again,

From whom? What place did you get the parts used.
A friend, yourself or a store?

EDIT01: I have understand and take for granted that when I read:''still working''.
The hardware still works. Okay but is not, for me, is granted is bad or good.
Maybe this hardware have a problem or disfunction or alteration.

Gloup_Gloup

[Gatuso]

ok

cpu, bought used, ive seen that is working...
mobo is from friend, by mistake he bought 2 same one...
ram is new, never used from friend..
psu, hdd and dvd are mine...

[Gloup_Gloup]

Hi again,

I suppose , by your last post in this Topic, then your old hardware (from you... psu, hdd, dvd)  is okay.

Have you verify if on official web site of Corsair RAM (2x2 Corsair TW3x4G1333C9A G ) is compatible with a motherboard H55M-D2H rev.1.4 ?

Gloup_Gloup.

[Gatuso]

its not in qvl but i saw many guys using same memory without problem...

now i do remember i had same problem with ep35c-ds3r....

that mobo has ddr2 and ddr3 memory slots...
when i used ddr3 1333 i had same problem like this one...
ive turned pc, he spins lights and fan and goes off..
what i did is i swaped for 667 / 800mhz memory and worked...

but this mobo has only option for ddr3 + i dont have with me any 1066 sticks

[Gloup_Gloup]

Hi again, 

About the corsair memory ( TW3x4G1333C9A )
have  you make a change in Bios for this settings? 9-9-9-24, 1.5V

Gloup_Gloup

[Gatuso]

I  would but i cant start it at all...

when i press button to turn it on, fan and lights show up for a sec and thats it...

i mean, ive explained in detail what happened...

dont know what else could be wrong to say, if u know what i mean...

[Gloup_Gloup]

Hi again,

Ok Gatuso,

Have you installed a Heat  Sink Fan on CPU  with a nut of Thermal paste on cpu?

Because, if a cpu have not a HSFan (with between cpu and HSF : Thermal paste) You have a situation generated a repeat problem.
Like no normal boot...

Gloup_Gloup

[Gatuso]

yes, i did...
thats the first thing im doing when im putting new heatsink on cpu..

[Gloup_Gloup]

yes, i did...
thats the first thing im doing when im putting new heatsink on cpu..

Hi again, 

I am sorry, but my english is not very well. Normaly I speak in French.
But I have a experience in hardware computer.

So ...

You said me, now , your cpu  have a heat sink fan installed?
Properly? Not too tight. just balanced on all sides?

Gloup_Gloup

[Gatuso]

As i said...

[Gloup_Gloup]

Hi again,

So now , I suppose you have just installed just one (1) stick of RAM in motherboard.
Try nearless... if possible.... check  if you are able to boot normaly.
If no , install Ram in other slot.

Gloup_Gloup