Official GIGABYTE Forum

GA-890GPA-UD3H Cooling Fan problem

GA-890GPA-UD3H Cooling Fan problem
« on: February 20, 2012, 09:39:37 pm »
 :) So I have a "GA-890GPA-UD3H" which I have had for a number of yrs and is a Great Board. My question is I just installed a "COOLER MASTER Hyper 212 Plus" with two 120mm fans. One is hooked up through the cpu 4 pin fan socket and the other fan is plugged into the Power fan 3 pin socket. My pc runs 24/7 and about every 12 to 24 hrs I get a windows pop up indicating the my cpu fan is failing and I need to shut down immediately. I am running Windows 764bit,with 8gb G-skill ram memory,currently a 3 core Athlon 3.2Ghz cpu but have a Phenom 2  x6 3.3Ghz ready for install. Some friends had said I should try using a "Y coupler" and run both fans off the cpu socket. (Both 120mm fans are COOLER MASTER) one came w/the cooler and the other is a aftermarket. In the BIOS I have the cpu warning temp set at 70c - 158f ,cpu fan warning - disabled,system fans 1 & 2 - disabled,power fan fail warning - disabled,cpu smart fan control - enabled,current system temp at 32c,cpu temp at 20c. I figure if the temps get too hot that the mobo will shut itself down (I could be wrong though). With the side panel off  in the BIOS I see that the cpu fan speed drops to " 0" from 881 rpm and the power fan speed is at 2000 rpm. Any help and or ideas will be greatly appreciated.

GIGABYTE GA-890GPA-UD3H AM3
COOLER MASTER Hyper 212 Plus
SAPPHIRE 100327L Radeon HD 6750 1GB 128-bit
Rosewill Xtreme Series RX750-D-B 750W Continuous
G.SKILL Ripjaws Series 4GB (2 x 2GB) (x2) 240-Pin DDR3 SDRAM DDR3 1333
Antec Nine Hundred Black Steel ATX Mid Tower Computer Case
Microsoft Windows 7 Ultimate
AMD Athlon II X3 435 Rana 3.2GHz Socket AM3 95W Triple-Core
Western Digital AV-GP WD-1TG
Western Digital Caviar Green WD20EARS 2TB 64MB (x2)
7 Ultimate 64-bit
GA-890GPA-UD3H AM3 AMD 890GX
Western Digital Caviar Green WD20EARS 2TB (x2)
Western Digital AV-GP WD-1TB
G.SKILL Ripjaws Series 8GB
SAPPHIRE 100327L Radeon HD 6750 1GB
Phenom II X4 980 Black Edition Deneb 3.7GHz
Antec Nine Hundred Black Steel
Rosewill-Xtreme Series RX7

Re: GA-890GPA-UD3H Cooling Fan problem
« Reply #1 on: March 10, 2012, 05:17:22 pm »
My cpu is now a "Phenom II X4 980 Black Edition Deneb 3.7GHz"
7 Ultimate 64-bit
GA-890GPA-UD3H AM3 AMD 890GX
Western Digital Caviar Green WD20EARS 2TB (x2)
Western Digital AV-GP WD-1TB
G.SKILL Ripjaws Series 8GB
SAPPHIRE 100327L Radeon HD 6750 1GB
Phenom II X4 980 Black Edition Deneb 3.7GHz
Antec Nine Hundred Black Steel
Rosewill-Xtreme Series RX7

Dark Mantis

  • *
  • 18405
  • 414
  • 10typesofpeopleoneswhoknow binaryandoneswhodont
    • Dark Mantis
Re: GA-890GPA-UD3H Cooling Fan problem
« Reply #2 on: March 10, 2012, 08:47:11 pm »
It sounds like it is a problem with the fan sensor and it is detecting it as failing at certain times. Whether it is only you can decide. You could supply them both direct from the PSU which would mean that they would run at top speed all the time or install a fan controller and use that to alter the speed. Make sure that you are running the latest BIOS if you want to continue to use the fan headers on the motherboard.
Gigabyte X58A-UD7
i7 920
Dominators 1600 x6 12GB
6970 2GB
HX850
256GB SSD, Sam 1TB, WDB320GB
Blu-Ray
HAF 932

Gigabyte Z68X-UD5-B3
i7 3770K
Vengeance 1600 16GB
6950 2GB
HCP1200W
Revo Drive x2, 1.5TB WDB RAID0
16x DLRW
StrikeX S7
Full water cooling
3 x 27" Iiy

Gloup_Gloup

  • 982
  • 33
  • Let us sweet between members, on the forum.
Re: GA-890GPA-UD3H Cooling Fan problem
« Reply #3 on: March 19, 2012, 08:12:07 am »
Hi damando,  ;)

I have a Nine Hundred from Antec. Original and first version.

So the fan in this case have not posibility to controlled by SpeedFan.
Because each fan have a independant control like minimum-middle-full range button option.

I agree Dark Mantis about a use one of those computer case temperature-controlled fan panels.

Have you tried ''Y coupler" and run both fans off the cpu socket?

What is the difference between system fans 1 & 2 - Disabled and Enabled, in Bios? In your situation... of course.

What is the temp in local area around computer?

Have you a picture about your mounting fan in tower... why not...  :P



Look my picture of 900 Antec with cpu rad (but not with fan... for less noise).

Gloup_Gloup
« Last Edit: March 19, 2012, 08:44:55 am by Gloup_Gloup »

Re: GA-890GPA-UD3H Cooling Fan problem
« Reply #4 on: October 15, 2012, 01:18:47 am »
Probably too late a reply, but I know what is causing the problem.

----

the hyper 212 evo is supposed to come with pwm 4 pin fan, if you have a 3 pin fan, then ignore all of above, the only thing you need to do is select
voltage fan control in bios

----

Basically sounds like the cpu fan control header (either via bios control of software control) isn't controling the pwm cpu fan correctly.  This will not be fixed with a Y coupler.  Most likely scenario is that it is not detecting the fan correctly and trying to using voltage control instead of pwm.

1st step

make sure you are not runing speedfan, as you want bios to control cpu fan speed
if you were running speed fan make sure the pwm1,2,3 are set to hardware control in advanced menu, then uninstall speedfan
go into bios and change cpu fan type to PWM, press F10 to save changes

if cpu fan speed still to gets reduced to zero rpm then try

2nd step change the cpu fan profile to normal (I assume you had it on silence)

if cpu fan speed still to gets reduced to zero rpm then try

3rd step change to manual cpu smart fan profile with a high slope

if cpu fan speed still to gets reduced to zero rpm then try

4th step disable cpu smart fan control on bios so it runs at a fixed speed
« Last Edit: October 15, 2012, 01:22:09 am by kiwijunglist »