Official GIGABYTE Forum

CPU compatibity, Gygabyte GA-G41MT-USB3

CPU compatibity, Gygabyte GA-G41MT-USB3
« on: March 19, 2012, 03:16:34 pm »
i just purchased the Gygabyte GA-G41MT-USB3 and can't get past post.
Could this be because my e2220 2.4gz intel petium dual core is not compatible?

Dark Mantis

  • *
  • 18405
  • 414
  • 10typesofpeopleoneswhoknow binaryandoneswhodont
    • Dark Mantis
Re: CPU compatibity, Gygabyte GA-G41MT-USB3
« Reply #1 on: March 19, 2012, 04:31:46 pm »
Hi .

Your processor is compatible with your motherboard from the first release of the BIOS so that shouldn't be the problem.

http://uk.gigabyte.com/support-downloads/cpu-support-popup.aspx?pid=3797

Perhaps if you listed all your hardware by make and model we might be able to throw some light on it.
« Last Edit: March 19, 2012, 04:32:44 pm by Dark Mantis »
Gigabyte X58A-UD7
i7 920
Dominators 1600 x6 12GB
6970 2GB
HX850
256GB SSD, Sam 1TB, WDB320GB
Blu-Ray
HAF 932

Gigabyte Z68X-UD5-B3
i7 3770K
Vengeance 1600 16GB
6950 2GB
HCP1200W
Revo Drive x2, 1.5TB WDB RAID0
16x DLRW
StrikeX S7
Full water cooling
3 x 27" Iiy

Lsdmeasap

  • 1166
  • 58
    • Gigabyte Support (TweakTown USA)
Re: CPU compatibity, Gygabyte GA-G41MT-USB3
« Reply #2 on: March 19, 2012, 05:16:14 pm »
And please explain further what you mean by can't get past post.  Does that mean you can't boot to an OS, or can't install an OS?  Or does it mean you can't post at all, or can't even enter the BIOS?   

Is the board starting at all, if so does it stay running, or does it reboot in cycles?  Do you hear any error beeps, if so what are they?  If not, please install a case speaker so you can hear the beeps if there are any.