No post / No power to Bios

[Dark Mantis]

Hi

I don't know which is likely to be the more accurate out of the two so I would suggest trying some others and see what the general concensus is. Also check in the BIOS as that tends to be accurate normally.

[pantz]

Hello again, well i manually brought the CPU voltage down from 1.375v to 1.350v, and the BIOS is seeing 1.350v ( in red font) so i believe the CPUZ readings is the correct one. so is VID and CPU core voltage the same thing ?.

Thanks in advance.

[Dark Mantis]

Correct.

[pantz]

Hello again, well i did a short two hour stability test ( during my nap lol) with AIDA64. with a room temp of 25C,
http://s567.photobucket.com/albums/ss118/Pantzdown/?action=view&current=stabilitytest.png

i was able to get a pretty decent OC'ing of 3716 at full load @ 1.350v  for the two hour test. not to shabby i think.

here are the final results



i am not even going to try to get to 4.0Ghz, but i would like to possible run at 3.8Ghz.

I think i will be able to get to 3.8Ghz if i was to lower my CPU voltage to 1.300v, and a X19 multiplier, by the looks of my temps,  i  believe i do have a little head room to try the 3.8Ghz

[pantz]

Hello Everyone, Well i have Reached my optimal setting for my Machine, and i think i still have some headroom to go a little further is i choose,

http://valid.canardpc.com/show_oc.php?id=2317556

http://www.techpowerup.com/gpuz/3uqrh/