Official GIGABYTE Forum

G1.Guerilla Bigfoot Killer E2100

G1.Guerilla Bigfoot Killer E2100
« on: April 11, 2012, 01:24:57 am »
Hi all,
The G1.Guerrilla advertises itself as having this nifty little onboard DDR2 'NPU' that utilises it's 1 GB of memory to manage network traffic. Question is: does it only work for an ethernet connected to the RJ-45 port or will it work with a PCI or USB adapter (considering the MoBo is probably cleverer than me)?
 
Also, should it work with the latter, which is best to use the PCI or USB adaptor?
 
Many thanks.
i7-980, Noctua NH-D14, G1.Guerrilla, 8GB DDR3 Corsair Vengeance, MSi GTX560 Ti Hawk, 60GB OCZ Agility 3 SSD, 3TB WD Caviar Green, Pioneer BDR-207DBK, Novatech Black 1KW modular PSU.

Dark Mantis

  • *
  • 18405
  • 414
  • 10typesofpeopleoneswhoknow binaryandoneswhodont
    • Dark Mantis
Re: G1.Guerilla Bigfoot Killer E2100
« Reply #1 on: April 11, 2012, 08:03:03 am »
Hi and welcome,

I feel that it would only work with the RJ45 port but I must admit to not being absolutely certain. I would suggest contacting GGTS for confirmation of this:

GGTS   http://ggts.gigabyte.com/

http://uk.gigabyte.com/support-downloads/support-downloads.aspx

Please expect several days for a reply.
Gigabyte X58A-UD7
i7 920
Dominators 1600 x6 12GB
6970 2GB
HX850
256GB SSD, Sam 1TB, WDB320GB
Blu-Ray
HAF 932

Gigabyte Z68X-UD5-B3
i7 3770K
Vengeance 1600 16GB
6950 2GB
HCP1200W
Revo Drive x2, 1.5TB WDB RAID0
16x DLRW
StrikeX S7
Full water cooling
3 x 27" Iiy