Official GIGABYTE Forum

Northbridge temps

arkon

  • 4
  • 0
Northbridge temps
« on: August 17, 2012, 08:05:08 am »
I'm having a weird problem with my NB temps. When I start my computer up, NB idle temp is idling around 44. If I then put my computer to sleep and wake it up again (ACPI sleep mode level S3) the temp has dropped to about 34 (idle as well). It stays around there, even if I sleep and wake my pc again, until I restart. So basically after waking the pc from sleep mode my NB temp reads around 10c cooler for some weird reason, I am never able to get the NB temp to read under 40c without doing the sleep and wake up thing.


AMD Phenom II 955 BE
Gigabyte 990FXA-UD5 
CoolerMaster Hyper TX3
Silverstone Strider 600w
4GB Mushkin Blackline
BIOS F10B
« Last Edit: August 17, 2012, 08:13:40 am by arkon »

Vezina

  • 871
  • 10
  • If it s not broken, fix it until it is !
Re: Northbridge temps
« Reply #1 on: August 17, 2012, 03:32:24 pm »
I see no real problem here.
A temperature of 44 Celsius for a NB chip is quite low.
That chip should take 70 Celsius just fine.
I think you are watching to much the monitoring software instead of really using your PC.

What is your CPU temperature ?!
Over & Out !

AMD FX (APU-s included) users should install - KB2645594 & KB2646060 under Windows 7

1.ASUS Sabertooth 990FX 2.0 + FX 6300 + H60
2.MSI A88X-G41 PC Mate + A8 5600K + Hyper TX 2
3.Gigabyte F2A75-D3H + A4 5300
4.ASUS AM1M-A + Athlon 5150

Re: Northbridge temps
« Reply #2 on: August 18, 2012, 08:07:50 pm »
Hi :)

I'm wondering if it is due to some bios or sensor glitch. Does the NB heatsink feel cooler aswell ?

A week ago, I accidentally hit the the sleep button on my keyboard and noticed that the cpu was idling 5-6C higher than norm, after booting it back up. Too bad I didn't make note of the mobo temp. heh..

I will try to replicate this now lol...

The screenie speaks for itslelf. Very odd !

What are you using to read the temps ?
« Last Edit: August 18, 2012, 08:08:30 pm by Hippie Tech »

Dark Mantis

  • *
  • 18405
  • 414
  • 10typesofpeopleoneswhoknow binaryandoneswhodont
    • Dark Mantis
Re: Northbridge temps
« Reply #3 on: August 18, 2012, 08:15:29 pm »
Does the CPU temperature drop back after a few minutes of being higher than normal ? If so it could be that waking from sleep doesn't give the fan time to cool the processor down as it starts up. When booting from cold it has a bit of mass to help it.
Gigabyte X58A-UD7
i7 920
Dominators 1600 x6 12GB
6970 2GB
HX850
256GB SSD, Sam 1TB, WDB320GB
Blu-Ray
HAF 932

Gigabyte Z68X-UD5-B3
i7 3770K
Vengeance 1600 16GB
6950 2GB
HCP1200W
Revo Drive x2, 1.5TB WDB RAID0
16x DLRW
StrikeX S7
Full water cooling
3 x 27" Iiy

Re: Northbridge temps
« Reply #4 on: August 18, 2012, 08:40:43 pm »
Does the CPU temperature drop back after a few minutes of being higher than normal ? If so it could be that waking from sleep doesn't give the fan time to cool the processor down as it starts up. When booting from cold it has a bit of mass to help it.

Speedfan's graph shows a 13 minute window and after a few more minutes, it leveled off at 34C.

Nothing else is out of the ordinary as all other temps and voltages read as they normally do. Also, the cpu shows no activity.

Shutting it down/ cold booting it seems to be the only fix. hmm..

Dark Mantis

  • *
  • 18405
  • 414
  • 10typesofpeopleoneswhoknow binaryandoneswhodont
    • Dark Mantis
Re: Northbridge temps
« Reply #5 on: August 18, 2012, 08:57:59 pm »
I can't think of any other reasonable explanation. Obviously try a different BIOS might work.
Gigabyte X58A-UD7
i7 920
Dominators 1600 x6 12GB
6970 2GB
HX850
256GB SSD, Sam 1TB, WDB320GB
Blu-Ray
HAF 932

Gigabyte Z68X-UD5-B3
i7 3770K
Vengeance 1600 16GB
6950 2GB
HCP1200W
Revo Drive x2, 1.5TB WDB RAID0
16x DLRW
StrikeX S7
Full water cooling
3 x 27" Iiy

Re: Northbridge temps
« Reply #6 on: August 19, 2012, 12:57:00 am »
I can't think of any other reasonable explanation. Obviously try a different BIOS might work.

I'm not worried b/c I never use sleep or hibernate. The first time this happened was with the F12 bios.

I thought I had Windows set to not sleep and hibernate, I guess not.