Ga-990FXA-UD3 ram problems 1600MHz

[Spokii]

Hellow,

I have new GA-990FXA-UD3 (rev. 1.2). Bios FD + Bulldozer FX CPU 8150 Black Edition + 32 GB RAM DUAL CHANEL Geli DDR3 / GEV316GB1600C9DC / 1600 MHz / Dual Chanel 2x 8GB.

Hear is my problem i cant get the RAM to run a 1600 MHz. Memory Controller , are set for 1333 Mhz, whay???. I woud like to run 1600 Mhz RAM. Why my RAM can't run over 1333 Mhz???.  Plas help me. THX

[absic]

Hi there,

you will need to manually set the speed and timings for your RAM in BIOS under the MIT section. For 1600MHz you will need the multiplier set to X8

[Spokii]

Hi there,

you will need to manually set the speed and timings for your RAM in BIOS under the MIT section. For 1600MHz you will need the multiplier set to X8

I tried this, but the motherborad continues to restore to default settings.     

[Spokii]

Hi there,

you will need to manually set the speed and timings for your RAM in BIOS under the MIT section. For 1600MHz you will need the multiplier set to X8

I tried this, but the motherborad continues to restore to default settings.     

I have information:

The system has experieneced boot failures because of overlocking

[Hippie Tech]

Remove 2 sticks of ram and try again.

Did you load optimized defaults, after you set it up ?

[hack]

Hellow,

I have new GA-990FXA-UD3 (rev. 1.2). Bios FD + Bulldozer FX CPU 8150 Black Edition + 32 GB RAM DUAL CHANEL Geli DDR3 / GEV316GB1600C9DC / 1600 MHz / Dual Chanel 2x 8GB.

Hear is my problem i cant get the RAM to run a 1600 MHz. Memory Controller , are set for 1333 Mhz, whay???. I woud like to run 1600 Mhz RAM. Why my RAM can't run over 1333 Mhz???.  Plas help me. THX

 hmm i have same problem with g-skill 1866 MHz - 1600 MHz so i put it to E.O.C.P profil 2 and it works  so you must try with all profiles