Official GIGABYTE Forum

GA-X58A-UD7 Missing Accessories

GA-X58A-UD7 Missing Accessories
« on: September 19, 2012, 10:18:51 am »
I own a GA-X58A-UD7 Rev. 2.0   

It was purchased from CCLonline.com exactly a year ago.

It was missing some "minor" accessories at the time and Gigabyte kindly supplied me with a backpklate and screws for the heatpipe.

My system is due an upgrade so I bought a couple of NVIDIA graphics cards to run in SLI.

Now I realise that the Gigabyte SLI bridges were also missing from my board.

Where can i get one? (yes, ebay springs to mind, but what is the exact component that I need?)

I would prefer the original Gigabyte accessory (because I'm fussy) but anything that will do the job adequately will do.

Any help would be appreciated.



System:
GA-X58A-UD7 Rev. 2.0
i7-960
OCZ 700w PSU
24 GB Kingston HyperX Blu 1600MHz
EVGA GTX 260 (2nd to be added)
1TB WD HDD
Fractal Design R3 case

Dark Mantis

  • *
  • 18405
  • 414
  • 10typesofpeopleoneswhoknow binaryandoneswhodont
    • Dark Mantis
Re: GA-X58A-UD7 Missing Accessories
« Reply #1 on: September 19, 2012, 11:04:04 am »
The Gigabyte version would be exactly the same to be honest, but I am sure if you searched for the particular make that you wanted you could probably find it.
Gigabyte X58A-UD7
i7 920
Dominators 1600 x6 12GB
6970 2GB
HX850
256GB SSD, Sam 1TB, WDB320GB
Blu-Ray
HAF 932

Gigabyte Z68X-UD5-B3
i7 3770K
Vengeance 1600 16GB
6950 2GB
HCP1200W
Revo Drive x2, 1.5TB WDB RAID0
16x DLRW
StrikeX S7
Full water cooling
3 x 27" Iiy

Re: GA-X58A-UD7 Missing Accessories
« Reply #2 on: September 19, 2012, 11:30:45 am »
Thanks for your reply, Dark Mantis.

It is the Gigabyte version, suitable for a GA-X58A-UD7 Rev. 2.0, that I am looking for.

Dark Mantis

  • *
  • 18405
  • 414
  • 10typesofpeopleoneswhoknow binaryandoneswhodont
    • Dark Mantis
Re: GA-X58A-UD7 Missing Accessories
« Reply #3 on: September 19, 2012, 07:53:41 pm »
All the SLI bridges are the same apart from some are different lengths. Any you get should work ok as long as they fit. Most are for a dual slot fitting as standard but you can get longer ones.
Gigabyte X58A-UD7
i7 920
Dominators 1600 x6 12GB
6970 2GB
HX850
256GB SSD, Sam 1TB, WDB320GB
Blu-Ray
HAF 932

Gigabyte Z68X-UD5-B3
i7 3770K
Vengeance 1600 16GB
6950 2GB
HCP1200W
Revo Drive x2, 1.5TB WDB RAID0
16x DLRW
StrikeX S7
Full water cooling
3 x 27" Iiy

Re: GA-X58A-UD7 Missing Accessories
« Reply #4 on: October 25, 2012, 05:44:09 am »
Hi

I have a spare one I am not using which you are welcome to have
Would you swap for the Northbridge heat fins that the previous owner of my board lost