He guys,
I need your help as not so expierenced overclocker!
Recently I switched from a ASUS P8P67 Pro (had some issues with cold boot) to the Z77X-D3H.
On the Asus I could very comfortably go up to 46 now on the Gigabyte everthing screams stop when I barly touch the 44. Did I miss something obvious or is the gigabyte just not as good?
First some stats:
Processor: i5-2500k
Cooler: Corsair A50, with 2 18mm Push-Pull (
http://j.mp/TbJ0S8 )
Motherboard Firmware/Rev: F16/1.0
When I remember correctly my vcore on the Asus was on auto and most of the time it only needed around 3.45v. Now I have to go up to 3.845 and under load it gets up to 4.04v. Which seems awful high for the mulitiplier and also like to reach temperature above >91° Celsius. Doesn't seem to good for high use.
I attach some pictures of my Mobo-Configuration (sry for iphone photo, don't use FAT disks anymore). Maybe I really did't something awfull dumb. If so please don't hestitate to tell me. Or if you need more infos.
I really would like to go at least for a stable 46, as I'm rendering a lot of the time and need a machine which can work quite some time under full load!
Thx a lot for reading all this,
Joe
Ps.: sry for my english, not an native speaker
