New to the forum but not new to Gigabyte at all.
I have a GA-M57SLI-S4 (rev. 2.0) with BIOS FHk and it runs fine with my old 6000+ DC installed. But I just got my new CPU the Phenom II X4 945 Quad and tried to install that and well all I get is a black screen at boot. Per the CPU support list on Gigabytes web site I should be able to run the 945 95W CPU.
Steps I have taken
1. Clear CMOS
2. Set the BIOS to default
3. Verified that it’s the 95 watt CPU via the box and cross checked it with AMD website.
http://products.amd.com/en-us/DesktopCPUDetail.aspx?id=588&f1=&f2=&f3=&f4=&f5=&f6=&f7=&f8=&f9=&f10=&f11=&f12=4. to make sure my motherboard is not damages I popped in the old 6000+ and it boots up without a problem. And that is what I am using right now.
Phenom II X4 945 is the 95w C2 version. HDX945WFGIBOX
http://www.giga-byte.com/Support/Motherboard/CPUSupport_Model.aspx?ProductID=2539 Any help is appreciated. Or any suggestions? TIA for any help.
If you need the specs here.
O/S Windows 7 Home premium 64bit
CPU Now the 6000+DC trying to swap to X4 945
RAM Corsair DDR2 800 (6400) 8GB
Motherboard GA-M57SLI-S4 (rev. 2.0) W/ BIOS FHk
Video card 9800 GTX
Case Stacker 830
PSU 750w Thermaltake
Sound XF-I Fatality
HDD 1 Seagate 7200.11 1TB SATA
HDD 2 Seagate 7200.11 1TB SATA
HDD 3 WD Carver 500GB (old) SATA
Optical 1 Samsung SH-S203B
Optical 2 Samsung SH-S203B
Monitor Samsung SyncMaster 2232BW