Official GIGABYTE Forum

z68xp-ud3 RAID question.

dmdilks

  • 3094
  • 43
  • "If it isn't broke don't fix it"
    • http://dmdcomputerservice.webs.com/
Re: z68xp-ud3 RAID question.
« Reply #15 on: June 06, 2013, 08:58:47 pm »
It does not ask for drivers.

So this window will go away as well , or is it something to be ignored?


"But that goes away as soon as I place the windows disk in, but it still over all says windows cannot be installed to this computers hardware may not support booting to this disk. make sure that the disk controller is enabled the computers BIOS menu"

i get this message when the GSATA is set to AHCI, formatted too
Stock Image i pulled off google that is the exact message i get


Windows can't load to that drive that has a partitiion on it you have to delete that partition for it to work.

Windows doesn't like it when you have format the drive too. That is why you getting that.

Click on drive option bottom right corner and in there you delete stuff.

Disconnect everything again and than go in there and delete the partition on the SSD and than you can load windows.

« Last Edit: June 06, 2013, 09:28:07 pm by dmdilks »
X299X Aorus Master, i9-9940x-3.30Ghz, 64gb G-Skill DDR4-2400, MSI RTX-3070 8GB, Cooler Master case, Thermal-take PSU 850w, 1-M2-NMVe SSD-512gb, 3-Pny 1TB SSD, 2-WD Raptors 1TB, Win 10 pro 64bit, Asus 35" 144Mhz Monitor.