EasyTune 8 not remembering settings.

[Livert]

Same problem here with my Noctua fans. Hoping for a fix in an update soon.

[polypenko]

Did some further testing, connected my 4 pin pwm Zawards 140mm Fans to the mb, was able to set everything to my lilking
but after a windows restart the fan connected to sys fan1 did not work only after I again Calibrated the Fans it started.

So it seems the current bios and or Easy Tune version do not correctly controll the Fans.

You would imagine these basic elements would have been tested by GB?

[Gloup_Gloup]

Hi all,  

If you have a fan with a control button, like Minimum - Middle - Maximum positon.
Otherwise, Fan with 3-speed switch control

or if you  use this
http://www.aliexpress.com/item-img/Mini-3-Pin-CPU-Fan-Speed-Controller-for-PC/820686101.html

It is normal than bios have not able to control a fan speed.

[polypenko]

I bought a 224,00 euro mb, one would expect that the Fan controlls work on the motherboard together
with the provided Easy Tune Software.

[Gloup_Gloup]

Hi,

Please give a answer:

Have you a fan with a control button, like Minimum - Middle - Maximum positon?

Have you a Fan with 3-speed switch control?

Have you a Fan controlled by Fan Control Panel?

If you are not sure, give us a picture about connection and cable fan in your  computer.
Give us a web link of brand about Case and Fan ....

Have you this case:
http://www.nzxt.com/product/detail/111-switch-810-case.html
Cooling System    Front, 2 X 120/140mm (1x 140mm included)
Rear, 1 X 120/140mm (1x 140mm included)
Top, 3 X 120/140mm (1x 140mm included)
Bottom, 2x 120/140mm
Interior, 2x 120/140mm (1x 140mm included)

Have you change or modify Fan control by add hardware cable or anyting?

In Bios:
What are the setting for fan ?

[polypenko]

I have a NZXT 810 with 5 140mm fans, for the time being they are connected to a loose nzxt phantom controller.

So Im able to adjust de speeds, however with this new built I thought to use all 5 mb fans connectors and set the
required speeds in the bios and or use Easy Tune to further fine tune the settings.

All my fans have to settings they are straight forward 140mm NZXT fans with a three pin connector.

 

[Gloup_Gloup]

Hi again,

So I understands , in your situation, on Bios, by the Bios way... you are able to control speed ... all 5 fans ? Right... yes or No...
At this step... forgot Easy tune 8 or any other version...
Just give infos about situation in Bios....

[polypenko]

Connected 1 120mm 3 pin fan to fan3 on the motherboard.

The settings in the Bios silent / normal and full work!

Fine tuned the setting Fan3 with Easy Tune and now the fan is running at the required rpm and temp.

Did some further testing Zaward 140mm 4 pin on sys fan 1 and sysfan 5 no go.

Gelid 4 pin on sysfan fan 5 - works / Zaward on system fan 5 does not work

Zalman 3 pin fan on system 3 works.


Since my Cpu 4 pin Gelid cooler is also not working correctly on the cpu fan header, it seems that the mb
has problems with certain 4 pin fans.

This matter is getting stranger by the minute, Zaward 4 pin does not work on sys fan 5 but 4 pin Gelid does, but Gelid
does not work correctly on the 4 pin CPU header.

Users of Noctua Fans have also encountered the same problem.

Trust a new bios will solve this issue.

 

[Svarog]

I could try a 3-Pin on the CPU Header myself, but i got everything cabled so tidy now. My 5 Case Fans run of a Scythe Kaze Master Pro.

I just want to be able to control my 2x Noctua NF-A14 PWM for the CPU.

I'm not sure if it's EasyTune or a 4-Pin issue. But once rebooted EasyTune resets the Fan Profile that has been made.

[Svarog]

Seems to be remembering the settings now with the new version of EasyTune.

So it was a bug in EasyTune after all.

[ysw]

Gigabyte webiste has new version ET6 B13.0703.1.
have u tried that?

[Svarog]

Gigabyte webiste has new version ET6 B13.0703.1.
have u tried that?

You must have missread my last post.