I rebuilt my PC using my existing Enermax Infiniti 650W PSU to run my Gigabyte GTX260 Super Overclocked.
I was finding the PC would restart in COD4 and 3DMark06. I stuck my old 7600GS in and I had no problems. Sent my 260 back to Gigabyte and it got replaced.
Stuck the new one in, still the same problem!
These are the four combinations I have tried.
- There is one dedicated 6 pin plug for GPU which I have used with a) one from the red socket b) one split cable that uses 2 of the black sockets, as shown above.
- Using 2 split cables supplied with GPU plugged into 2 black sockets as shown.
- Using the two red sockets.
- One red socket and a split cable into 2 of the black sockets.
Sometimes it tells me there are voltage problems on boot and revert to basic bios settings, which in turn, I get an application error, asking me to close the program (COD4)
Does anyone think this PSU can't supply the required amps for the GPU?