Official GIGABYTE Forum

Z87-DS3H Where is CMOS Setup?!

Cyran

  • 5
  • 0
Z87-DS3H Where is CMOS Setup?!
« on: March 18, 2014, 02:50:28 pm »
Hi

I cant seem to enter the CMOS Setup with my new board (Z87-DS3H) Cant find it anywhere... I need to increase my delay for HDD so I can overcome my persistent cold boot issues..

Where is it :S  ???
« Last Edit: March 18, 2014, 02:58:13 pm by Cyran »

ex58

  • 854
  • 37
Re: Z87-DS3H Where is CMOS Setup?!
« Reply #1 on: March 18, 2014, 03:18:47 pm »
Pressing "DEL" on keyboard,when ON .......

Cyran

  • 5
  • 0
Re: Z87-DS3H Where is CMOS Setup?!
« Reply #2 on: March 18, 2014, 03:25:52 pm »
I'm talking about the CMOS setup / Advanced CMOS settings.. Not the BIOS.. I've been searching in bios but I cant find it anywhere. When you enter advanced cmos settings you have the option to increase the delay to HDD among other things.


dmdilks

  • 3094
  • 43
  • "If it isn't broke don't fix it"
    • http://dmdcomputerservice.webs.com/
Re: Z87-DS3H Where is CMOS Setup?!
« Reply #4 on: March 18, 2014, 05:34:57 pm »
Try and change it Legacy boot in Boot Mode Selection.
X299X Aorus Master, i9-9940x-3.30Ghz, 64gb G-Skill DDR4-2400, MSI RTX-3070 8GB, Cooler Master case, Thermal-take PSU 850w, 1-M2-NMVe SSD-512gb, 3-Pny 1TB SSD, 2-WD Raptors 1TB, Win 10 pro 64bit, Asus 35" 144Mhz Monitor.

Cyran

  • 5
  • 0
Re: Z87-DS3H Where is change HDD Delay?!
« Reply #5 on: March 18, 2014, 07:12:00 pm »
Doesnt work...Same thing again, i turned off the computer for 2 hours and it wouldnt boot cold.. Fans and everything is spinning but I'm not getting a signal to my monitor. I have to restart several times + hold the power button, before it works.

I had the same damn problem with my old board (ASUS P8P67 Pro) back then I tried to replace my memory to no avail. And now new motherboard and new CPU (i5 4670k) same damn problem... Its driving me insane!!!

Could it be my PSU ? Coolermaster Silent Pro M 700W

I'm quite sure changing the HDD delay to 2-3 seconds would fix the problem.. But I cant find it, I've searched everywhere..Really bad if they removed that option on this board..

« Last Edit: March 18, 2014, 07:16:32 pm by Cyran »

dmdilks

  • 3094
  • 43
  • "If it isn't broke don't fix it"
    • http://dmdcomputerservice.webs.com/
Re: Z87-DS3H Where is CMOS Setup?!
« Reply #6 on: March 19, 2014, 11:01:37 pm »
The thing is that it sounds like you are using the same monitor right? Two different MB companies do the same thing.

I would be looking at some thing other than the MB. What are you using for video on-board or a card?
X299X Aorus Master, i9-9940x-3.30Ghz, 64gb G-Skill DDR4-2400, MSI RTX-3070 8GB, Cooler Master case, Thermal-take PSU 850w, 1-M2-NMVe SSD-512gb, 3-Pny 1TB SSD, 2-WD Raptors 1TB, Win 10 pro 64bit, Asus 35" 144Mhz Monitor.

Cyran

  • 5
  • 0
Re: Z87-DS3H Where is CMOS Setup?!
« Reply #7 on: March 20, 2014, 08:51:34 pm »
Yes I'm using only one monitor. My videocard is HD 6870 1GB. Its a horrible problem because you can never pinpoint the problem to one specific part until you replace almost everything..Like I said i suspect my PSU the most at the moment.. But it could also be my GPU or maybe HDD? It just irritates me that there isnt any option on the board to increase HDD delay to 2-3seconds, because I've read that it fixed a lot of cold boot problems for many people.