Questions about GIGABYTE products > X99 Motherboards
GA-X99-UD5 post reboot loop
platypus65:
I had the exact same thing happen on my X99 Gamer 5 board and an Asus X99 Deluxe board. With no USB plugs (other than keyboard and mouse) the boards booted fine. But once I plugged in a couple of hubs and other devices, the boards would not boot. This appears to be a X99 issue - not just limited to Gigabyte.
zil_jay:
--- Quote from: platypus65 on October 01, 2014, 02:48:31 pm ---I had the exact same thing happen on my X99 Gamer 5 board and an Asus X99 Deluxe board. With no USB plugs (other than keyboard and mouse) the boards booted fine. But once I plugged in a couple of hubs and other devices, the boards would not boot. This appears to be a X99 issue - not just limited to Gigabyte.
--- End quote ---
I had the same problem, posted about it here: http://forum.giga-byte.co.uk/index.php/topic,15150.0.html
What makes you say it appears to be an x99 issue? I guess other people with x99 boards are having the same USB issues?
platypus65:
Hi Zil Jay - The only reason I think it may be a problem inhernet to X99 Boards is that I hade the exact same issue with both my Asus X99 Deluxe Board (which I returned) and the Gigabyte X99 Gamer 5. Disabling USB during boot was a temporary fix for both boards.
dmdilks:
I have a Ga-X99-UD4 and I have USB stuff plugged in. I'm not having any problem with the boot. It has the 1st bios that came with the board too F5.
Jimmy-Z:
I had the exact same problem with my gaming 5 board. It would show the logo, beep once, then a black screen for a while & then reboot. Q-flash plus to the latest bios fixed it. No ram, nothing plugged into usb, no GPU & with a fat32 flash drive with a renamed bios in the white port. Might do a few reboots before it takes. ;D
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version