GA-990fxa-UD3 rev. 1.1 & FX-8120

alucke · « **on:** September 25, 2014, 12:37:19 am »

In the bios, under PC health, I was checking the CPU temp. The cpu was running a 54'C. my room temp is 23'C. I heard that the cpu temps should be between 45'C-50'C. Is my cpu bad or should I check the Heatsink/fan? Any input would be appreciated.

alucke

autotech · « **Reply #1 on:** September 25, 2014, 01:23:55 am »

Are you using the stock heatsink that came with it? If so might want to look at an aftermarket cooler. 54 does seem a bit high. My 1090t runs at 31c and my i7 even lower.

alucke · « **Reply #2 on:** September 25, 2014, 01:41:48 am »

I am using an aftermarket cooler. The Zalman cooler I am using, was used with my Phenom x4 before I upgraded to the FX processor. So maybe its time to replace the zalman cooler.

autotech · « **Reply #3 on:** September 25, 2014, 01:43:34 am »

I am using a zalman 9500 for the past 4 CPU's and it hasn't failed. Fan still spins and it keeps it cool.

alucke · « **Reply #4 on:** September 25, 2014, 06:01:31 pm »

well i have a new GA-990fxa-ud3 Rev. 4 coming tomorrow. I will see if will fix my issue, of my cpu running hot and the mouse and keyboard freezing every so often.

alucke · « **Reply #5 on:** September 27, 2014, 01:10:44 am »

Welp I figured out what the problem was. My cpu Heatsink/fan was starting to die.

GA-990fxa-UD3 rev. 1.1 & FX-8120

alucke

GA-990fxa-UD3 rev. 1.1 & FX-8120

autotech

Re: GA-990fxa-UD3 rev. 1.1 & FX-8120

alucke

Re: GA-990fxa-UD3 rev. 1.1 & FX-8120

autotech

Re: GA-990fxa-UD3 rev. 1.1 & FX-8120

alucke

Re: GA-990fxa-UD3 rev. 1.1 & FX-8120

alucke

Re: GA-990fxa-UD3 rev. 1.1 & FX-8120