Questions about GIGABYTE products > X99 Motherboards

X99 UD4 No post, loop boot 10 second,

(1/3) > >>

Malka:
Hi.

hi,
I just bought a Gigabyte "x99 ud4" i7 5820k processor. crucial memories ct4g4dfs8213 4x4 When I try to start. the system can not start for more than 10 seconds. Then it goes off, and last another 10 seconds restarts.
I tried to put only 1 memory module. all connectors needed no longer active. I checked with another power supply, and also checked the pin socket and all seem to be correct. I updated the BIOS to version F8 F9C Y. When I update the bios. everything seems to work right and the system is restarted. It is the only time that the system seems to be doing the right thing. But after updating the Bios when I restart the memory module all go wrong again. I checked out of memory to start with the same result with it. I've also found that I am using the correct memory slim. Since it is not. I have no similar motherboard, processor or other similar or reports to verify that this failing. Someone with a similar fault? Thank you very much.

Malka:
I have seen now. that intel core I5 processor requiere a mínimum 0.5v in off mode. to states c6 and c7. Motherboard come in with this feature enabled? this can produce this behavior ?

ex58:
 Try latest BIOS F9e.....is on TT forum.
Once flashed ,clear_CMOS.

Malka:
i have a pwer but older psu. i wait to monday to buy a new psu in intel haswell psu compatibility and then i will try again start the system and test you suggestion with bios f9e. do you thing an old psu can cause boot loop with no post?

ex58:
Any other USB hardware connected,except mouse and keyboard?

Navigation

[0] Message Index

[#] Next page