Questions about GIGABYTE products > X99 Motherboards
GA-X99-UD4 can't go to bios setup
dmdilks:
How do you have you drives connected. The last 4 by themselves are standard sata device connection.
I have the same board and I have 2 SSD, 3 HHD, DVD, & DVD/rw. My DVD drives are in the last 4.
Extradry:
--- Quote from: dmdilks on December 08, 2014, 10:49:30 pm ---How do you have you drives connected. The last 4 by themselves are standard sata device connection.
I have the same board and I have 2 SSD, 3 HHD, DVD, & DVD/rw. My DVD drives are in the last 4.
--- End quote ---
I have tried just the boot SSD in both first two and the last 4 on its own to no avail. What is your exact setup? Maybe its a setting in the bios I overlooked.
dmdilks:
I have my 2 SSD setup in raid controller. The other thing is how did you set up windows just normal or with UEFI. Does it boot up with a windows boot manager in the bios for first boot?
But when first set up the computer before I got the 2 SSD I ran it in AHCI and normal boot no UEFI to make sure everything work.
dmdilks:
I just double check everything to make sure how the drives are connected.
#1 SSD - #2 DVD drives - #3 WD 10,000 rpm drives
In the bios the sSata controller is set to AHCI
The Sata controller is set to Raid. Plus the SSD's show up as [UEFI sandisk] & [Intel Volume 0] in the bios as the 1st & 2nd boot.
It was first set up with [Intel Volume 0]. But when I updated the bios it now has [UEFI sandisk] too. I can boot to either one of them.
Extradry:
--- Quote from: dmdilks on December 09, 2014, 06:28:03 am ---I just double check everything to make sure how the drives are connected.
#1 SSD - #2 DVD drives - #3 WD 10,000 rpm drives
In the bios the sSata controller is set to AHCI
The Sata controller is set to Raid. Plus the SSD's show up as [UEFI sandisk] & [Intel Volume 0] in the bios as the 1st & 2nd boot.
It was first set up with [Intel Volume 0]. But when I updated the bios it now has [UEFI sandisk] too. I can boot to either one of them.
--- End quote ---
Well so I pulled all the drives out and set the PCH to RAID and it worked! Although i had to go back to ACHI and into windows to change the registry from ACHI to RAID but it worked. Thanks alot mate that had me stumped for a while!
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version