Hello, I recently purchased the mini-itx board from gigabyte, the H87TN
There is no one place in the manual where the DC input voltage is indicated ! How the hell is this possible due to the importance of the volts !!
Then on the Canadian website; as the spanish does not mention voltage for power, so here:
http://ca.gigabyte.com/products/product-page.aspx?pid=4754#ov I found "GIGABYTE Thin Mini-ITX motherboards offer a broad voltage range of 12v to 19v"
So, I go to a electronic shop and purchase a 12V, 15, 16, 18, 19V selectable adaptor with the connector found as DC input on the motherboard. The connector is a very rare one.
Now I connected the adaptor with 12V to the mobo and also a switch to the power pins (6 and 8 as indicated on manual). Nothing starts, nothings power's on.
Whats happen ?
Can anyone help me, how can I start the mobo, can i place some jumper in some of the pin power or reset header ? (rare but reset only have 1 pin so im unable to use a jumper for reset alone as jumper goes for 2 pins.