Official GIGABYTE Forum

Will it boot ?

Will it boot ?
« on: July 19, 2015, 11:45:25 pm »
I am planning to buy AMD FX-9590 CPU with Gigabyte GA-990FXA-UD3 (rev. 4.0) which comes with bios version F1.
When I check the CPU Support list http://www.gigabyte.com/products/product-page.aspx?pid=4672# it says Since BIOS Version F3 for the FX-9590. Will it boot with bios version of F1 ?

dmdilks

  • 3084
  • 43
  • "If it isn't broke don't fix it"
    • http://dmdcomputerservice.webs.com/
Re: Will it boot ?
« Reply #1 on: July 22, 2015, 02:03:18 pm »
It might and it might not. I have read way people got them to work. But I'm not saying 100% sure it will work. I have some Intel's that didn't have the right bios and work. But with only using one stick of memory to update the bios. If I put in two sticks it wouldn't boot. 
X299X Aorus Master, i9-9940x-3.30Ghz, 64gb G-Skill DDR4-2400, MSI RTX-3070 8GB, Cooler Master case, Thermal-take PSU 850w, 1-M2-NMVe SSD-512gb, 3-Pny 1TB SSD, 2-WD Raptors 1TB, Win 10 pro 64bit, Asus 35" 144Mhz Monitor.

AgentFXA

  • 379
  • 17
    • none
Re: Will it boot ?
« Reply #2 on: July 23, 2015, 02:03:04 am »
You likely can boot into bios Q-flash (end key) and update from there - just have the new bios on an usb stick to load from.
« Last Edit: July 23, 2015, 02:04:26 am by AgentFXA »
X570 Aorus Elite Wifi / Ryzen 2700x / Gigabyte Radeon RX 7900 XT Gaming OC 20G Graphics Card / 16 GB HyperX Predator 3200 / SeaSonic 850W / Tt View 71 TG / Win10x64