Flashing BRIX BIOS

[MartinT]

Is there some ju-ju involved in getting the BRIX (GB-BSi7-6500) to boot into MS-DOS?  I'm trying to flash the BIOS to the new F4 version.  I have used two methods to create a bootable USB drive (the old HP utility and Rufus) but booting the BRIX on F12 and selecting the drive has a look at it and then proceeds to boot W10 from the SSD anyway.

Any ideas?

[MartinT]

Answering my own question, you have to set 'W7' BIOS mode and then it will boot into MS-DOS.  With the default 'W8-W10' mode, it will not.

BIOS now successfully updated to F4.

[Ray-Welshman]

Many thanks Martin, I tried various methods before I found your posts on the subject and now my GB-BSi3-6500 BIOS is updated to F4.

Regards, Ray