Official GIGABYTE Forum

x58a-ud3r (rev2) no display, no beep

x58a-ud3r (rev2) no display, no beep
« on: April 29, 2016, 02:07:04 pm »
For some unknown reason these past few days my pc no longer boots.

It doesn't not show any display, post or makes a speaker beeps.

I tested it with different working PSU, GPU and RAM.

I have reseated the CPU, and reapply new thermal paste.

All it does when powered on is
-CPU fan spins
-lights near RAM slots are on
-there is a static muffle can be heard in the motherboard speaker when initially powered on (but no beeps
-cpu voltage lights are off
-northbridge lights are off.

Unfortunately this board is way to old for RMA.
Any solutions or suggestions of what to do?

It would be a waste of a good CPU if the board is faulty.
Why So Serious?

dmdilks

  • 3093
  • 43
  • "If it isn't broke don't fix it"
    • http://dmdcomputerservice.webs.com/
Re: x58a-ud3r (rev2) no display, no beep
« Reply #1 on: April 29, 2016, 03:15:02 pm »
Have you tried to move the video card to another slots? Have tried to pull the battery and jump out the cmos?
X299X Aorus Master, i9-9940x-3.30Ghz, 64gb G-Skill DDR4-2400, MSI RTX-3070 8GB, Cooler Master case, Thermal-take PSU 850w, 1-M2-NMVe SSD-512gb, 3-Pny 1TB SSD, 2-WD Raptors 1TB, Win 10 pro 64bit, Asus 35" 144Mhz Monitor.

Re: x58a-ud3r (rev2) no display, no beep
« Reply #2 on: April 29, 2016, 10:12:55 pm »
Have you tried to move the video card to another slots? Have tried to pull the battery and jump out the cmos?

yes, I just move it to all different slots and still no display or beep.

I only used one 4gb RAM (for testing) in the recommended slot in the manual.

I have removed it outside of the case to test all these tests and it is not working

I also removed CMOS battery (for a few minutes) and also press clear cmos.

Is there a way to flash another BIOS or use the backup BIOS without seeing the display?



« Last Edit: April 29, 2016, 10:21:58 pm by The Joker »
Why So Serious?

Re: x58a-ud3r (rev2) no display, no beep
« Reply #3 on: May 01, 2016, 03:06:27 am »
Problem has been solved.
Why So Serious?

dmdilks

  • 3093
  • 43
  • "If it isn't broke don't fix it"
    • http://dmdcomputerservice.webs.com/
Re: x58a-ud3r (rev2) no display, no beep
« Reply #4 on: May 01, 2016, 05:09:10 am »
Problem has been solved.

How did you solve it?
X299X Aorus Master, i9-9940x-3.30Ghz, 64gb G-Skill DDR4-2400, MSI RTX-3070 8GB, Cooler Master case, Thermal-take PSU 850w, 1-M2-NMVe SSD-512gb, 3-Pny 1TB SSD, 2-WD Raptors 1TB, Win 10 pro 64bit, Asus 35" 144Mhz Monitor.