Official GIGABYTE Forum

Z77X-UD4H + Win10 x64 + USB 3.0

Z77X-UD4H + Win10 x64 + USB 3.0
« on: July 15, 2016, 11:37:28 am »
Hi Guys,

I use Z77X-UD4H motherboard and I have recently upgraded OS to Win10 x64. I can see USB 3.0 drivers on official website for Win7/8.1 but not for Win10. Is there any way of getting them? All ports work fine but whatever I connect to USB 3.0 ports, USB 3.0 flash, USB 3.0 external drive, it doesn't operate at full transfer (it operates at (20-30 MB/s).

Thank you in advance.
« Last Edit: July 15, 2016, 11:38:12 am by mmoryto »

dmdilks

  • 3093
  • 43
  • "If it isn't broke don't fix it"
    • http://dmdcomputerservice.webs.com/
Re: Z77X-UD4H + Win10 x64 + USB 3.0
« Reply #1 on: July 15, 2016, 12:25:19 pm »
Sorry to have to tell you this but there is no drivers. Plus we have seen that problem on other older boards. It is a windows 10 problem not a mother board problem. One other thing is which one is you driver. If it is Intel then windows 10 is using the windows 7 driver.
X299X Aorus Master, i9-9940x-3.30Ghz, 64gb G-Skill DDR4-2400, MSI RTX-3070 8GB, Cooler Master case, Thermal-take PSU 850w, 1-M2-NMVe SSD-512gb, 3-Pny 1TB SSD, 2-WD Raptors 1TB, Win 10 pro 64bit, Asus 35" 144Mhz Monitor.

Re: Z77X-UD4H + Win10 x64 + USB 3.0
« Reply #2 on: July 15, 2016, 12:51:14 pm »
Thank you for the reply.

I was thinking of installing Win7 drivers so I will give it a go. There are two chips supporting USB 3.0 on this board, Intel and VIA VL800. I can see drivers for Win7/8.1 on VIA's website so will try these too.