GA-EP43-DS3L motherboard and Corsair memory.
I have just bought 4 Corsair memory modules for this old motherboard. Each module is 1024 MB @ 1066 MHz.
The timing printed on the memory is: 5-5-5-15 and 2.10 Volts
In the BIOS under MB Intelligence Tweaker, there is DRAM Timing Schedule (SPD)
>>>>> Standard Timing Control
CAS Latency Time
tRCD
tRP
tRAS
Do I set these to 5, 5, 5, 15 respectively. At the moment, I have left them as Auto. Because I do not know what I am doing, and I do not want to stuff things up.
*** Mother Board Voltage Control ***
Down the bottom is DRAM Voltage. Do I change this to 2.10 Volts? It is at Auto at the moment.
Thanks
