Official GIGABYTE Forum
  1. Official GIGABYTE Forum
  2. Questions about GIGABYTE products
  3. Motherboards with Intel processors
  4. GA-B250M-D3H resets to default after unpluging psu
« previous next »
Pages: [1]   Go Down

GA-B250M-D3H resets to default after unpluging psu

SLK

  • 3
  • 0
GA-B250M-D3H resets to default after unpluging psu
« on: March 21, 2017, 01:08:57 pm »
New motherboard GA-B250M-D3H (tested 2 new motherboards) resets bios settings to default when turning on after unpluging psu for a long time.

One mobo has F1 ver. of bios, second F4 - no difference.

It doesn't reset when psu is not unplugged after turning off computer.

Battery checked, different settings of bios checked. No change. Windows' stability is ok.

Please help, I don't know what to do.

RAM: Corsair DDR4, 8GB, 2400MHz
CPU: Pentium G4560
Logged

dmdilks

  • 3094
  • 43
  • "If it isn't broke don't fix it"
    • http://dmdcomputerservice.webs.com/
Re: GA-B250M-D3H resets to default after unpluging psu
« Reply #1 on: March 22, 2017, 12:33:49 pm »
The only thing that keeps the cmos saved is the battery. If the you are losing the settings then it is the battery or bad connection with the battery. Or a bad connection from the battery to the bios chips. I would email or call support.
Logged
X299X Aorus Master, i9-9940x-3.30Ghz, 64gb G-Skill DDR4-2400, MSI RTX-3070 8GB, Cooler Master case, Thermal-take PSU 850w, 1-M2-NMVe SSD-512gb, 3-Pny 1TB SSD, 2-WD Raptors 1TB, Win 10 pro 64bit, Asus 35" 144Mhz Monitor.

SLK

  • 3
  • 0
Re: GA-B250M-D3H resets to default after unpluging psu
« Reply #2 on: March 23, 2017, 05:52:12 am »
You are right.

If power is back, WOL light is blinking, but it was disabled earlier in bios. It means the bios was reset before turning on motherboard.
Logged
Pages: [1]   Go Up
« previous next »
  1. Official GIGABYTE Forum
  2. Questions about GIGABYTE products
  3. Motherboards with Intel processors
  4. GA-B250M-D3H resets to default after unpluging psu