Ga-z68mx-ud2h-b3 1.3 ami logo only, no text

[Antrophin3]

When the system boots i can see AMi bios logo, but not the standard text of diagnostics and detected devices. The computer works normal.
Is there some hidden option in UEFI to make it show the standard POST text?

[shadowsports]

Greetings,
See page 48 of your manual.

Full Screen LOGO Show
Allows you to determine whether to display the GIGABYTE Logo at system startup. Disabled displays normal POST message. (Default: Enabled)

[Antrophin3]

Greetings,
See page 48 of your manual.

Full Screen LOGO Show
Allows you to determine whether to display the GIGABYTE Logo at system startup. Disabled displays normal POST message. (Default: Enabled)

Thanks for your reply. That setting is set to disa bled, but i still cant see normal post message info, just the black screen with only AMI logo at the top mid of the screen. My bios is latest U1e.

[shadowsports]

What type of display are you running?  How is it connected?

Are you using Fast or Ultra Fast Boot Option?  If so, disable and retest.

[Antrophin3]

What type of display are you running?  How is it connected?

Older samsung 2232bw lcd monitor connected to r9 280x via dvi-i cable.

[Antrophin3]

Are you using Fast or Ultra Fast Boot Option?  If so, disable and retest.

Ok ill try that and give you feedback.

[shadowsports]

The monitor and its connection is fine.  1680 x 1050 which is older 16:10 aspect ratio.  I suspect fastboot.

[Antrophin3]

Are you using Fast or Ultra Fast Boot Option?  If so, disable and retest.

Ok ill try that and give you feedback.

IT was already set to disabled (fastboot option). This is wierd thing. Hmmm

[shadowsports]

To troubleshoot: Please test with onboard video connector.  You can also try pressing Esc or Tab at POST.

[Antrophin3]

To troubleshoot: Please test with onboard video connector.  You can also try pressing Esc or Tab at POST.

It is all the same no changes.