Official GIGABYTE Forum

GA-965P-DS3 and Q8300

cheche

  • 2
  • 0
GA-965P-DS3 and Q8300
« on: May 15, 2010, 02:58:38 pm »
Hi,
I have a GA-965P-DS3 and it is wokring fine with a E6300 CPU. I would like to change that CPU for a Q8300. So I had a look on the CPU supporte4sd list. http://www.gigabyte.com.tw/Support/Motherboard/CPUSupport_Model.aspx?ProductID=2314 and this CPU is supported.
  -- I  have upgrade the BIOS to version F14  but as soon as I change the CPU the Unit does not start the tipical "bip" is missing and the screens still on balck.

Does anyone can tell me how to get the CPU on that Motherboard working.

Thanks

Fatman

  • 523
  • 18
Re: GA-965P-DS3 and Q8300
« Reply #1 on: May 16, 2010, 04:11:50 am »
So you can't enter the bios at all now?

Re: GA-965P-DS3 and Q8300
« Reply #2 on: February 28, 2011, 12:13:25 am »
Hi, I have the same issue and saw you never had reply... Did you figure out how to solve this?

Dark Mantis

  • *
  • 18405
  • 414
  • 10typesofpeopleoneswhoknow binaryandoneswhodont
    • Dark Mantis
Re: GA-965P-DS3 and Q8300
« Reply #3 on: February 28, 2011, 08:22:54 am »
Hi and welcome to the Gigabyte Forum.

Sounds like you have a problem that hasn't been resolved. We shall have to look into it.

What revision motherboard are you using ?
Gigabyte X58A-UD7
i7 920
Dominators 1600 x6 12GB
6970 2GB
HX850
256GB SSD, Sam 1TB, WDB320GB
Blu-Ray
HAF 932

Gigabyte Z68X-UD5-B3
i7 3770K
Vengeance 1600 16GB
6950 2GB
HCP1200W
Revo Drive x2, 1.5TB WDB RAID0
16x DLRW
StrikeX S7
Full water cooling
3 x 27" Iiy