No Display on my new board (US2H 1.1)

[richardm]

 I appreciate any assistance in getting my problem solved

So I just got the board MA785GM-US2H 1.1 today and I have installed it to my case and it is all hocked up right (I think). So I will turn it on and no display comes up on my PCI-E VGA or the motherboard VGA, pluged into two diffrent monaters.

I have a ATI HD 5770 PCI-E
and the defult VGA pulged in to diffrent monaters (to see if any thing works)

if you have any idea why this happens, Can you help me?

if you need more information about the computer just ask!

Richard

[bigdaveberg]

On the off chance there may be not enough power?
Could you give a rundown of your computer

[Dark Mantis]

Well as bigdave said you haven't given us much to go on, please give a complete rundown of your hardware.
Also on some boards/CPU combination the onbard VGA is disabled, so you would be limited to your graphics card.

[richardm]

Ok yea sorry I was on a ipod anyway here are the specs

-corsair 850W Power Supply
-ATI Randon 5770
-amd phenom 8450 triple core processor
-AM2+ Socket
-Windows XP Home
-CoolerMaster Scout Case

anything else I am missing?

[Dark Mantis]

Are these all new components or is this an existing build? Are you sure that you have plugged in all the power supply connections eg 12v 2x4pin EATX by the CPU, extra power cables for the graphics card?

[richardm]

Are these all new components or is this an existing build? Are you sure that you have plugged in all the power supply connections eg 12v 2x4pin EATX by the CPU, extra power cables for the graphics card?

Yea all the parts are from an existing build and the olny new thing is the motherboard

and yes all the power cables are pulged in.

FAST Story

So I got the new board and it plug in all the power and usb cables and like it boots up and I am sure windows boots up but nothing shows anything on the monaters

[Dark Mantis]

Does it make any beeps when it is POSTing? By the way how have you got the primary display plugged in as the DVI-D port does not support D-Sub connection by adapter. What memory are you using?

[richardm]

Does it make any beeps when it is POSTing? By the way how have you got the primary display plugged in as the DVI-D port does not support D-Sub connection by adapter. What memory are you using?

No it dose not make any beeps at all. I am only useing the VGA port on the motherboard and DVI port -> Adapter -> VGA
And DDR2 1GB (i think 1336)

if you like I can take pics and upload them?

[Dark Mantis]

No, that's what I mean the adaptor wont work!

DVI port -> Adapter -> VGA

[Dark Mantis]

Use just one montor(the one that has a vga plug on it) and connect it to the vga port. You probably don't really have enough memory anyway as the onboard graphics will use some. What operating system do you have installed if any? Yes take some pictures inside the case and of the back panel.

[richardm]

Umm yea I fixed the computer problem

one of my sticks of RAM went bad and would not let it start up :/

anyway THANK YOU for all the help it is because you asked what RAM I had make me think of it!!!!

THANK YOU SO MUCH

[Dark Mantis]

No problem I am glad that you managed to sort it out without to much fuss.