Questions about GIGABYTE products > Motherboards with Intel processors

H110M-S2H doesn't recognize SSD

<< < (2/3) > >>

shadowsports:
Greetings,
And the model of the SSD you are connecting is?

850?  (etc)

Do you have any fan controllers, splitters, etc installed?

Do you have Fast or Ultra Fast Boot enabled? (disable if so)

Have you performed a CLR_CMOS?

amron:
Sorry, silly me, the SSD is a SanDisk model SDSSDA-120G.
no fan controllers installed.
there is Fast Boot - it's disabled.
haven't done CLR_CMOS.
hope it helps. frustrating.

dmdilks:

--- Quote from: amron on June 15, 2020, 02:29:45 pm ---Thanx for your reply. yes, I have connected a sata 3 hdd and it was recognized.

--- End quote ---

One other thing is I have seen where sata cable some times will not go in all the way. If you have a sata cable with out the click on it try that. Because you are using basically a standard drive connection on the SSD. 

amron:
 :) Thanx dmdilks. I followed your advise and it did the trick! it's odd, because I've used the cable to connect the HDD and it was ok, but I'm not going to argue with the facts.

shadowsports:

--- Quote from: amron on June 16, 2020, 04:09:08 am --- :) Thanx dmdilks. I followed your advise and it did the trick! it's odd, because I've used the cable to connect the HDD and it was ok, but I'm not going to argue with the facts.

--- End quote ---

@dmdilks,

Nice!  :)

Navigation

[0] Message Index

[#] Next page

[*] Previous page