Gigabyte GA-890GPA-UD3H (rev 2.0, bios FC) - G.Skill Ripjaws 1600 cl7 problems

[KalashNK]

Hi
I tried to set RAM at 800Mhz and 7,8,7,24, but it's not stable, even with 1,6v (like SPD say) or 1,65v. What kind of problem i could have? The cpu overclock seems to be ok (AMD 965 B.E. @ 3,7 with stock cooler). Anyone can help me?
Thanks

K.

[Dark Mantis]

Well if you could list all your hardware exactly we might get a better picture of what the problem is.

[KalashNK]

Well if you could list all your hardware exactly we might get a better picture of what the problem is.

Yes, sorry:
AMD Phenom II 965 B.E.
Gigabyte GA-890GPA-UD3H (rev 2.0, bios FC)
2x2GB G.Skill Ripjaws DDR3-1600 CL7
2x Ati Radeon hd5750 1GB CF (but the problem is the same with only one card)
Corsair HX650W
HD Seagate Barracuda LP 1TB

[Dark Mantis]

I think that your memory is the problem. The motherboard/CPU doesn't seem to like 1600 memory. See this thread :
http://forum.giga-byte.co.uk/index.php/topic,2379.0.html

[KalashNK]

I think that your memory is the problem. The motherboard/CPU doesn't seem to like 1600 memory. See this thread :
http://forum.giga-byte.co.uk/index.php/topic,2379.0.html

Yes, i read it just now. So it's a common issue...i hope gigabyte can resolve this with a bios update.
Thank you 

[Dark Mantis]

Yes, let's hope so but we think it may be a much bigger, more deep rooted problem and if that's the case it will take more than a BIOS update to fix it.