Official GIGABYTE Forum

Getting Verifying dmi pool data, amd data change update new data to dmi! ????

andjayik

  • 20
  • 0
Computerwas working fine last night, turned it on this morning and getting Verifying dmi pool data, amd data change update new data to dmi!

Computer won't go past this on the bios screen? Tried reseting bios to load optimal settings and same thing. Recently updated bios to F9. Can i go back to F1
« Last Edit: August 26, 2010, 01:41:45 pm by andjayik »
GIGABYTE GA-970A-D3
AMD Athlon II x4 630  am3 2.9ghz
Patriot Viper Series DDR3 PC3-10666 1333MHz 4GB CL
ocz solid 3 120gb ssd

absic

  • *
  • 5815
  • 529
  • Never give up; Never surrender!
    • Bandcamp
Hi there,

To answer your question yes, you can go back to BIOS F1 if you want to. A couple of questions though.....
Did you use QFlash to update BIOS or @BIOS?
Did you jump from F1 straight to F9 or did you do it in a couple of jumps?
What motherboard are you using?
Remember, when all else fails a cup of tea and a good swear will often help! It won't solve the problem but it will make you feel better.

andjayik

  • 20
  • 0
Yes i did use qflash
i went from f1 right to f9
mt mobo is in my signature   GIGABYTE MA785GMT-UD2H

What can be causing this?
« Last Edit: August 26, 2010, 01:50:46 pm by andjayik »
GIGABYTE GA-970A-D3
AMD Athlon II x4 630  am3 2.9ghz
Patriot Viper Series DDR3 PC3-10666 1333MHz 4GB CL
ocz solid 3 120gb ssd

Dark Mantis

  • *
  • 18405
  • 414
  • 10typesofpeopleoneswhoknow binaryandoneswhodont
    • Dark Mantis
It is always best to update the BIOS in stages if it is a big difference. Just safer that way. It will probably be beneficial to go back and then when you are sure it is stable and running properly reinstall the later BIOS in stages.
« Last Edit: August 26, 2010, 01:56:37 pm by Dark Mantis »
Gigabyte X58A-UD7
i7 920
Dominators 1600 x6 12GB
6970 2GB
HX850
256GB SSD, Sam 1TB, WDB320GB
Blu-Ray
HAF 932

Gigabyte Z68X-UD5-B3
i7 3770K
Vengeance 1600 16GB
6950 2GB
HCP1200W
Revo Drive x2, 1.5TB WDB RAID0
16x DLRW
StrikeX S7
Full water cooling
3 x 27" Iiy

andjayik

  • 20
  • 0
Thanks for the advise but i need to know why all of a sudden i get this message and it wont go into win 7?
GIGABYTE GA-970A-D3
AMD Athlon II x4 630  am3 2.9ghz
Patriot Viper Series DDR3 PC3-10666 1333MHz 4GB CL
ocz solid 3 120gb ssd

absic

  • *
  • 5815
  • 529
  • Never give up; Never surrender!
    • Bandcamp
What can be causing this?
To be honest it could be a number of things.

Before re-flashing BIOS I would suggest clearing CMOS just to see if that clears the problem.

When you flashed BIOS did you Disable the "Keep DMI Data" option in QFlash before you updated?

sorry when I asked about your Mobo I actually meant to ask for Revision No.
« Last Edit: August 26, 2010, 01:57:35 pm by absic115 »
Remember, when all else fails a cup of tea and a good swear will often help! It won't solve the problem but it will make you feel better.

andjayik

  • 20
  • 0
to clear the cmos do u just unplugg the computer for a bit?
GIGABYTE GA-970A-D3
AMD Athlon II x4 630  am3 2.9ghz
Patriot Viper Series DDR3 PC3-10666 1333MHz 4GB CL
ocz solid 3 120gb ssd

absic

  • *
  • 5815
  • 529
  • Never give up; Never surrender!
    • Bandcamp
A little more involved than that. Check out the FAQ here: http://forum.giga-byte.co.uk/index.php/topic,2286.0.html which tells you what to do.

Remember, when all else fails a cup of tea and a good swear will often help! It won't solve the problem but it will make you feel better.