Managed to OC my CPU to 4025.03 MHz. I"m running Prime95 FFt's to see if it is stable overnight. Here are my BIOS settings:
Advanced CPU Features:Gigabyte
CPU Clock Ratio ................................ [23x]
Intel(R) Turbo Boost Tech .................. [disable]
CPU Cores Enabled ............................ [All]
CPU Multi Threading .......................... [Enabled]
CPU Enhanced Halt (C1E) ................... [Disabled]
C3/C6/C7 State Support .................... [Disabled]
CPU Thermal Monitor ......................... [Enabled]
CPU EIST Function ............................ [Disabled]
Virtualization Technology ................... [Enabled
Bi-Directional PROCHOT ..................... [Enabled]
Uncore & QPI Features:
QPI Link Speed .............................. x36
Uncore Frequency .......................... (x17)
Isonchronous Frequency ..................cant find this option
Standard Clock Control:
Base Clock (BCLK) Control ................ [Enabled]
BCLK Frequency (MHz) .....................175
PCI Express Frequency (MHz) ........... [auto]
C.I.A.2 [Disabled]
Advanced Clock Control:
CPU Clock Drive ..............................[800mV]
PCI Express Clock Drive ................... [900mV]
CPU Clock Skew ............................. [0ps]
IOH Clock Skew ............................. [0ps]
Advanced DRAM Features:
Performance Enhance ...................... [Standard]
Extreme Memory Profile (X.M.P) ......... [Disabled]
System Memory Multiplier (SPD) ........ [8.0]
DRAM Timing Selectable (SPD) .......... [Manual]
Channel A + B + C
Channel A Timing Settings:
##Channel A Standard Timing Control##
CAS Latency Time ......................9
tRCD .......................................9
tRP .........................................9
tRAS .......................................24
tRC ........................................ auto
tRRD .......................................auto
tWTR ...................................... auto
tWR ........................................auto
tWTP ....................................... auto
tWL ........................................ auto
tRFC .......................................auto
tRTP .......................................auto
tFAW ......................................auto
Command Rate (CMD) ................auto
Round Trip Latency ...................auto
B2B CAS Delay ..........................auto
Advanced Voltage Control:
CPU
Load Line Calibration ................. [auto]
CPU Vcore ...............................1.256v[auto]
QPI/VTT Voltage 1.150v ............1.175v[auto]
CPU PLL 1.800v .......................1.800v[auto]
MCH/ICH
PCIE ...........................1.500v[auto]
QPI PLL .......................1.100v[auto]
IOH Core ..................1.100v[auto]
ICH I/O .......................1.500v[auto]
ICH Core........................1.100v [auto]
DRAM
DRAM Voltage..............1.600v
DRAM Termination 0.750v [AUTO]
Ch-A Data VRef. 0.750v [AUTO]
Ch-B Data VRef. 0.750v [AUTO]
Ch-C Data VRef. 0.750v [AUTO]
Ch-A Address VRef. 0.750v [AUTO]
Ch-B Address VRef. 0.750v [AUTO]
Ch-C Address VRef. 0.750v [AUTO]
If anyone sees anything I should change please let me know
Thanks
