Hi and welcome to the Gigabyte Forum.
I don't want to be the harbinger of bad news but I hope you are sat down
You could really have done a bit more research before buying all that lovely hardware. Just getting the top components doesn't always guarantee that they will work as specified.
Firstly the memory. Anything above 1600Mhz is totally wasted if you are not overclocking heavilly and yours we would need to be talking about 4Ghz+ to get the real benefit. I would just suggest running it at 1600 and maybe trying to tighten the timings a little.
Secondly the SATA3 6Gbs SSD. It will be quick but there is no point running it on the Marvell 9128 controller ports even though they are supposed to be capable of 6Gbs. The chip just doesn't live up to expectations (Marvell problem not Gigabyte) and will fall over if you try to push too much data through at high speed. Another downside to the Marvell ports is that the chip doesn't pass TRIM commands which are necessary for the health of the SSD.
In short use the Intel ICH10R southbridge ports even though they are only SATA2 they will actually work faster and pass the TRIM commands.
Hope this has helped a little.
