Gigabyte EP45T USB3P

[kornkiller507]

Hi all

I need your Help....

I have a MB Gigabyte ep45t usb3p and buys memories tw3x4g1600c9d G(4gb ddr3 1600) it installs and them and they do not work to me well.

attempt to form timing and voltage to 1.8v but does not work me or, I enter the system but note something of lag and also when I enter to play is freezing the PC but use to me 1 single memory of 2gb and works good.

please if they can help to find the correct configuration for my memories

they excuse my English bad one

Thnx

::SEALs::KoRn

[Dark Mantis]

Hi and welcome to the Giagbyte Forum.

I have been doing some checking and according to Corsair your memory doesn't exist the nearest they have is TW3X4G1333C9 and your motherboard isn't compatible with those modules anyway.

On the Gigabyte QVL there is no mention of your memory being compatible so that is probably where your troubles lay.

Did you research the components berfore purchasing them?

[kornkiller507]

Hi and welcome to the Giagbyte Forum.

I have been doing some checking and according to Corsair your memory doesn't exist the nearest they have is TW3X4G1333C9 and your motherboard isn't compatible with those modules anyway.

On the Gigabyte QVL there is no mention of your memory being compatible so that is probably where your troubles lay.

Did you research the components berfore purchasing them?

This is the memory kits

http://www.amazon.com/Corsair-TW3X4G1600C9D-Dominator-PC3-12800-1600Mhz/dp/B002D18C04/ref=sr_1_1?ie=UTF8&s=electronics&qid=1287764753&sr=8-1

these are the technical details of mb

Technical Details

    * CPU: Socket 775 Support Intel Core 2 Extreme/Core 2 Quad/Core 2 Duo/Pentium Extreme Edition/Pentium D/Pentium 4 Extreme Edition
    * Chipset: Intel P45 & Intel ICH10R Memory: 4x DDR3-2200+/1333/1066/800 DIMMs, Dual Channel, Upto 16GB
    * Slots: 2x PCI-Express 2.0 x16 Slots(support ATI CrossFireX Technology); 3x PCI-Express x1 Slots; 2x PCI Slots IDE/SATA: 1x ATA-133 Channel
    * Audio: Realtek ALC889 7.1-Channel High Definition Audio CODEC LAN: Realtek RTL8111D Gigabit Ethernet Controller
    * Ports: 10x USB 2.0 Ports (6 rear, 4 by headers); 2x USB 3.0 Ports; 3x IEEE 1394a Ports

I could not find memories geil  2gb 1600 or ocz  1600 I only could find corsair tw3x4g1600c9d for this mb

[Dark Mantis]

Well I searched both Gigabyte and Corsair for these modules (TW3X4G1600C9D) and neither website has them on it.
If it is any use though I did find on the Gigabyte site QVL that 1600 memory is supposed to be downgraded to 1333 so it might be worth trying  that as a setting

EP45T-USB3P DDR3 1600 ( downgrade to DDR3 1333)

[kornkiller507]

Well I searched both Gigabyte and Corsair for these modules (TW3X4G1600C9D) and neither website has them on it.
If it is any use though I did find on the Gigabyte site QVL that 1600 memory is supposed to be downgraded to 1333 so it might be worth trying  that as a setting

EP45T-USB3P DDR3 1600 ( downgrade to DDR3 1333)

Ok
it excuses to occupy its time

I believe that I go to throw this MB
I thought that to be good but I see that it does not fulfill anything than it promises (2200+) I wanted to deposit my confidence in gigabyte but I feel totally defrauded

thanks anyway

[Dark Mantis]

Whoa buddy. I didn't say the motherboard wouldn't run faster RAM I just said the the 1600Mhz memory should be  downgraded, there is a difference.  If you buy fast RAM on the following list you can OC it to 2200 Mhz

http://download.gigabyte.eu/FileList/Memory/mb_memory_ga-ep45t-usb3p.pdf

No. Size Module Supplier Module P/N. SS/DS Comp. Used Component P/N. Single-channel Dual-channel
SET20B1 1GB STAREX
STH100UD0814-
2000A
SS v v
CR20B1 1GB Crucial
BL12864BE2009.8S
FB3
SS v v
PAET186B1 1GB PATRIOT PVS32G1866LLK SS v v

[kornkiller507]

Whoa buddy. I didn't say the motherboard wouldn't run faster RAM I just said the the 1600Mhz memory should be  downgraded, there is a difference.  If you buy fast RAM on the following list you can OC it to 2200 Mhz

http://download.gigabyte.eu/FileList/Memory/mb_memory_ga-ep45t-usb3p.pdf

No. Size Module Supplier Module P/N. SS/DS Comp. Used Component P/N. Single-channel Dual-channel
SET20B1 1GB STAREX
STH100UD0814-
2000A
SS v v
CR20B1 1GB Crucial
BL12864BE2009.8S
FB3
SS v v
PAET186B1 1GB PATRIOT PVS32G1866LLK SS v v

1gb 2200 lol

no Thanks men!

thanks friend already I said my decision

[Brimac]

I have a 45t usb3 gigabyte mobo,currently running 2x2gig 1800mhz Patriot mem.
No problems at all, not even overclocked but they are not made anymore.
Patriot works well with all Gigabyte boards

[antaresST]

I have the same problem kornkiller507 need to downgrade my memory to 1333 please help me, not as is done
Corsair TW3X4G1600C9D Dominator 4 GB Memory Kit

how do I set this in the bios?  I have a core 2 quad q6600

please help me I should do? to downgrade

[Dark Mantis]

I have a 45t usb3 gigabyte mobo,currently running 2x2gig 1800mhz Patriot mem.
No problems at all, not even overclocked but they are not made anymore.
Patriot works well with all Gigabyte boards

Hi
Are you just making a statement or are you asking a question?

I have the same problem kornkiller507 need to downgrade my memory to 1333 please help me, not as is done
Corsair TW3X4G1600C9D Dominator 4 GB Memory Kit

Well where you have it set to 1600 just pull the setting back to 1333 and you can probably tighen the timings a bit in the process so you won't actually lose any speed as such.

[antaresST]

yes i asking a question

you can explain me how?

I am not technical but if you explain me in detail I think I can do.

[Dark Mantis]

Hi
Well in the BIOS you must have enable the XMP setting to get the memory to run at 1600 as opposed to the default so just disable that setting. It probably says Profile 1 at the moment. The memory should then revert to the default setting.