Official GIGABYTE Forum

ON board graphics

Bluemani

  • 21
  • 1
Re: ON board graphics
« Reply #30 on: December 20, 2010, 09:07:13 pm »
is mine a dual bios?

Dark Mantis

  • *
  • 18405
  • 414
  • 10typesofpeopleoneswhoknow binaryandoneswhodont
    • Dark Mantis
Re: ON board graphics
« Reply #31 on: December 20, 2010, 09:22:03 pm »
No you are quite right I forgot which board it was and on looking I wouldn't say it is. You seem to only have one 4M BIOS chip.

In that case I cannot think of any other course of action but to contact GGTS and see what they say. But to be honest I can't see you getting anywhere with them.

Just enter your email address and click on the language of choice.
GGTS   http://ggts.gigabyte.com.tw/Default.aspx

Sorry I can't hlep further.
Gigabyte X58A-UD7
i7 920
Dominators 1600 x6 12GB
6970 2GB
HX850
256GB SSD, Sam 1TB, WDB320GB
Blu-Ray
HAF 932

Gigabyte Z68X-UD5-B3
i7 3770K
Vengeance 1600 16GB
6950 2GB
HCP1200W
Revo Drive x2, 1.5TB WDB RAID0
16x DLRW
StrikeX S7
Full water cooling
3 x 27" Iiy

Bluemani

  • 21
  • 1
Re: ON board graphics
« Reply #32 on: December 20, 2010, 09:30:10 pm »
hey well we tried, i really appreciate your help i cant thank you enough, i will let you know if i get it working in the future,

thank you for your time. 

Dark Mantis

  • *
  • 18405
  • 414
  • 10typesofpeopleoneswhoknow binaryandoneswhodont
    • Dark Mantis
Re: ON board graphics
« Reply #33 on: December 20, 2010, 09:31:36 pm »
You are welcome I just wish we could have fixed it now. :-\
Gigabyte X58A-UD7
i7 920
Dominators 1600 x6 12GB
6970 2GB
HX850
256GB SSD, Sam 1TB, WDB320GB
Blu-Ray
HAF 932

Gigabyte Z68X-UD5-B3
i7 3770K
Vengeance 1600 16GB
6950 2GB
HCP1200W
Revo Drive x2, 1.5TB WDB RAID0
16x DLRW
StrikeX S7
Full water cooling
3 x 27" Iiy

Bluemani

  • 21
  • 1
Re: ON board graphics
« Reply #34 on: December 21, 2010, 11:12:11 am »
Hi me again, one last question, alot of people have said that i should make a bootable usb, would that work? and what do i do once i have it? can you give me a step by step if you know how to?
many thanks

Bluemani

  • 21
  • 1
Re: ON board graphics
« Reply #35 on: December 21, 2010, 02:44:11 pm »
I done it, it turn out that my bios couldnt use the USB because it was an old version so had to use floppy, but the one i had already we faulty so i got a new floppy and it all worked, then i put my graphics card in, my computer accepted it, it all came on, i updated my drivers and its working good, thanks again for your help

Dark Mantis

  • *
  • 18405
  • 414
  • 10typesofpeopleoneswhoknow binaryandoneswhodont
    • Dark Mantis
Re: ON board graphics
« Reply #36 on: December 21, 2010, 04:28:59 pm »
No problem, I'm sorry I wasn't around to help today, been a bit busy. Anyway you have done it all yourself without my help I see, well done. So we were right it was just faulty hardware that was the problem. ;)
Gigabyte X58A-UD7
i7 920
Dominators 1600 x6 12GB
6970 2GB
HX850
256GB SSD, Sam 1TB, WDB320GB
Blu-Ray
HAF 932

Gigabyte Z68X-UD5-B3
i7 3770K
Vengeance 1600 16GB
6950 2GB
HCP1200W
Revo Drive x2, 1.5TB WDB RAID0
16x DLRW
StrikeX S7
Full water cooling
3 x 27" Iiy

Bluemani

  • 21
  • 1
Re: ON board graphics
« Reply #37 on: December 21, 2010, 06:34:54 pm »
well i wouldn't say it was all me, you did tell me to ask for help from gigabyte, they told me it  could of been the floppy, so i just asked my mate to buy me one and it worked,