Official GIGABYTE Forum

GA-M57SLI-S4 molex power plug neccessary?

Rpg16

  • 8
  • 0
GA-M57SLI-S4 molex power plug neccessary?
« on: April 23, 2008, 11:01:31 am »
Im having the upmentioned board with 6600gt, and Athlon x2 4200+
do i need to connect the 4pin molex on the motherboard?
The manual says only needed for SLI but do i need to connect it when i try to overclock the card?
The card itself has no extra power connector.
Im an Estonian so my english is not that good :P
A State Of Trance

Re: GA-M57SLI-S4 molex power plug neccessary?
« Reply #1 on: April 23, 2008, 03:44:08 pm »
i would say connect it.
AMD Athlon 64 X2 Dual Core 3800+ | GA-M57SLI-S4 (rev. 2.0) Bios FG | Crucial Ballistix 4GB DDR2 PC2-6400C4
BFG GeForce 8800 GT OC | Creative Labs X-FI Extreame Gamer | Hiper HPU-4K580-MK Type R 580W Modular ATX2.2 PSU

Rpg16

  • 8
  • 0
Re: GA-M57SLI-S4 molex power plug neccessary?
« Reply #2 on: April 23, 2008, 06:33:54 pm »
it could not hurt?
tho the manual says connect on SLI?

Will it help powering the pci-e lanes or something else too?
Would not like to ruin my board.
Im an Estonian so my english is not that good :P
A State Of Trance

Re: GA-M57SLI-S4 molex power plug neccessary?
« Reply #3 on: April 24, 2008, 01:10:37 pm »
not sure if it powers the pci-e slots but personly i wouldnt want to try and risk it
AMD Athlon 64 X2 Dual Core 3800+ | GA-M57SLI-S4 (rev. 2.0) Bios FG | Crucial Ballistix 4GB DDR2 PC2-6400C4
BFG GeForce 8800 GT OC | Creative Labs X-FI Extreame Gamer | Hiper HPU-4K580-MK Type R 580W Modular ATX2.2 PSU