Official GIGABYTE Forum

X58-UD9 Hybrid silent pipe doesnt fit poor design?

X58-UD9 Hybrid silent pipe doesnt fit poor design?
« on: January 15, 2011, 03:07:28 pm »
Hi All,

Just started to build my new pc. Was just about to put the silent pipe in and it is no where neer close to fitting. Basically there is a molex connector (AUX for the GPU) right where the heat pipe is supposed to go about half way along between where the cooler gets bolted in and to the other side of the case.
anyone come across this yet?

Dark Mantis

  • *
  • 18405
  • 414
  • 10typesofpeopleoneswhoknow binaryandoneswhodont
    • Dark Mantis
Re: X58-UD9 Hybrid silent pipe doesnt fit poor design?
« Reply #1 on: January 15, 2011, 06:46:51 pm »
Hi and welcome to the Gigabyte Forum.

This is a known issue but it is not something that you need to worry about unless you are going to be filling all the slots with GPUs. As long as you fit the other power connectors it will be ample.
Gigabyte X58A-UD7
i7 920
Dominators 1600 x6 12GB
6970 2GB
HX850
256GB SSD, Sam 1TB, WDB320GB
Blu-Ray
HAF 932

Gigabyte Z68X-UD5-B3
i7 3770K
Vengeance 1600 16GB
6950 2GB
HCP1200W
Revo Drive x2, 1.5TB WDB RAID0
16x DLRW
StrikeX S7
Full water cooling
3 x 27" Iiy

Re: X58-UD9 Hybrid silent pipe doesnt fit poor design?
« Reply #2 on: January 16, 2011, 02:05:00 am »
Hi and welcome to the Gigabyte Forum.

This is a known issue but it is not something that you need to worry about unless you are going to be filling all the slots with GPUs. As long as you fit the other power connectors it will be ample.

I am running two GTX580's . So what you are saying is that i do not need to plug in the molex connectors? just power into the gpu's

Lsdmeasap

  • 1166
  • 58
    • Gigabyte Support (TweakTown USA)
Re: X58-UD9 Hybrid silent pipe doesnt fit poor design?
« Reply #3 on: January 16, 2011, 08:24:39 am »
You do not need to use the molex's on the board at all for your GPU's, it's optional, you can connect them to your power supply as you normally would.

Dark Mantis

  • *
  • 18405
  • 414
  • 10typesofpeopleoneswhoknow binaryandoneswhodont
    • Dark Mantis
Re: X58-UD9 Hybrid silent pipe doesnt fit poor design?
« Reply #4 on: January 16, 2011, 11:02:11 am »
Hi and welcome to the Gigabyte Forum.

This is a known issue but it is not something that you need to worry about unless you are going to be filling all the slots with GPUs. As long as you fit the other power connectors it will be ample.

I am running two GTX580's . So what you are saying is that i do not need to plug in the molex connectors? just power into the gpu's

Yes that should be adequate. As Lsdmeasap said it is an either/or situation.
Gigabyte X58A-UD7
i7 920
Dominators 1600 x6 12GB
6970 2GB
HX850
256GB SSD, Sam 1TB, WDB320GB
Blu-Ray
HAF 932

Gigabyte Z68X-UD5-B3
i7 3770K
Vengeance 1600 16GB
6950 2GB
HCP1200W
Revo Drive x2, 1.5TB WDB RAID0
16x DLRW
StrikeX S7
Full water cooling
3 x 27" Iiy