Official GIGABYTE Forum

GA-H67A-UD3H arriving tomorrow: do I need these particular drivers??

ignatz

  • 5
  • 0
In the next day or two, I will be building a Sandy Bridge PC with the GA-H67A-UD3H motherboard--my first Gigabyte board.

I'm somewhat confused on which drivers I must install and which are optional or completely unnecessary.

I will use integrated video and integrated audio.

I hope to implement AHCI in the BIOS before installing Windows.

I want full SATA support/compatibility, but RAID is not needed.

Here are a few things I'm pretty sure I need:

Intel H67 chipset INF update utility, dated Jan 4, 2011, downloaded from Intel directly
Intel Management Engine interface for H67, dated Jan 19, 2011, downloaded from Intel directly
Realtek ALC892 audio driver, Windows 7 64 bit; downloaded today from Gigabyte
Realtek LAN driver, Windows 7 64 bit; downloaded today from Gigabyte


But I'm not sure about these, although they supposedly are compatible with my motherboard:

Intel SATA RAID Driver, Windows 7 64 bit; downloaded today from Gigabyte.com
Intel VGA Driver, Windows 7 64 bit 12611, downloaded today from Gigabtyte.com
Marvell SATA3 Console Driver 1.0.0.1014, downloaded today from Softpedia; not seen at Gigabyte.com
Marvell SATA3 RAID Utility 4.1.0.1905, downloaded from Softpedia today; not seen at Gigabyte.com
NEC USB 3.0 Driver, Windows 7 64 bit; downloaded today from Gigabyte.com

I'm guessing the Windows 7 64-bit installation disc will have versions of some or all of these as well.

Note that I did not see some of these at the Gigabyte website.

I'd appreciate any comments on which drivers are mandatory, marginal, pointless, worthless, etc----and whether versions on the Windows disc may be preferable. I'm much more interested in reliability and freedom from issues, rather than the latest doo-dad or last bit of speed.


Thanks.


« Last Edit: January 27, 2011, 04:36:23 am by ignatz »

Dark Mantis

  • *
  • 18405
  • 414
  • 10typesofpeopleoneswhoknow binaryandoneswhodont
    • Dark Mantis
Re: GA-H67A-UD3H arriving tomorrow: do I need these particular drivers??
« Reply #1 on: January 27, 2011, 08:14:30 am »
Hi

Stop worrying so much, it is far less painful than you are expecting and if you miss a driver you can always instal it afterwards.

Quote
Intel H67 chipset INF update utility, dated Jan 4, 2011, downloaded from Intel directly
Intel Management Engine interface for H67, dated Jan 19, 2011, downloaded from Intel directly
Realtek ALC892 audio driver, Windows 7 64 bit; downloaded today from Gigabyte
Realtek LAN driver, Windows 7 64 bit; downloaded today from Gigabyte

It looks like al these are needed and it is best to download them directly from the internet as they are the newest ones. The ones on the motherboard disk will be older.

You don't need any of the RAID driver batch you posted.

Thw Windows7 64 bit disk wioll have just about everything you will need apart from the above and then you can update any that have newer versions available.
Gigabyte X58A-UD7
i7 920
Dominators 1600 x6 12GB
6970 2GB
HX850
256GB SSD, Sam 1TB, WDB320GB
Blu-Ray
HAF 932

Gigabyte Z68X-UD5-B3
i7 3770K
Vengeance 1600 16GB
6950 2GB
HCP1200W
Revo Drive x2, 1.5TB WDB RAID0
16x DLRW
StrikeX S7
Full water cooling
3 x 27" Iiy