Official GIGABYTE Forum

Need help re-assembling/testing a RMA'd Gigabyte 890XA-UD3 v.1

Dark Mantis

  • *
  • 18405
  • 414
  • 10typesofpeopleoneswhoknow binaryandoneswhodont
    • Dark Mantis
Re: Need help re-assembling/testing a RMA'd Gigabyte 890XA-UD3 v.1
« Reply #45 on: February 14, 2011, 09:30:01 pm »
Hi Soar
In theory the Arctic Silver should be fine because it is the heat that cures it not just being open to the air, however for the price of a liitle bit of TIM I would say clean it off and re-apply some fresh. In my eyes AS5 is still one of the top thermal compounds.
Gigabyte X58A-UD7
i7 920
Dominators 1600 x6 12GB
6970 2GB
HX850
256GB SSD, Sam 1TB, WDB320GB
Blu-Ray
HAF 932

Gigabyte Z68X-UD5-B3
i7 3770K
Vengeance 1600 16GB
6950 2GB
HCP1200W
Revo Drive x2, 1.5TB WDB RAID0
16x DLRW
StrikeX S7
Full water cooling
3 x 27" Iiy

Re: Need help re-assembling/testing a RMA'd Gigabyte 890XA-UD3 v.1
« Reply #46 on: February 15, 2011, 01:41:59 pm »
Hi Soar
In theory the Arctic Silver should be fine because it is the heat that cures it not just being open to the air, however for the price of a liitle bit of TIM I would say clean it off and re-apply some fresh. In my eyes AS5 is still one of the top thermal compounds.

Thanks DM.  Will do!
AMD 1055T
GIGABYTE GA-990FXA-UD3
XFX 6870 DD
Corsair Vengeance 1600 16GB
OCZ ZX-850 Watt Gold
HAF 932

Intel i5-3570
ASRock Z77 Extreme4
GeForce 560Ti
OCZ ZX-850 Watt Gold
Corsair Vengeance 1600 16GB
CM HAF X Blue

Both Systems:

Windows 7+10
Scythe Temp Monitor + Fan Controller