Official GIGABYTE Forum

GA-P67A-UD7: No POST, FF Error Code

Re: GA-P67A-UD7: No POST, FF Error Code
« Reply #15 on: February 25, 2011, 12:33:23 am »
Hey Dark Mantis!

I found the problem~!
I installed the motherboard in the tower and booted it up with VGA OK
Although I was pretty surprised that when I tried the HDMI cable to boot first time it didn't work.

Anyhow, the motherboard must have been shorting when I turned it on while it was on the cardboard box.
When the guy at the computer shop booted it up he put it on the glossy outter box.

I have a feeling that made a difference!

Well now we both know! Thanks again~!
I'll be keeping this board till the B3 version comes out!

Peace!

- Steve

Dark Mantis

  • *
  • 18405
  • 414
  • 10typesofpeopleoneswhoknow binaryandoneswhodont
    • Dark Mantis
Re: GA-P67A-UD7: No POST, FF Error Code
« Reply #16 on: February 25, 2011, 08:34:19 am »
HI Steve,

Gald you finally managed to find the problem and get it sorted out. Hopefully you will be all right now until the new boards come out.
Gigabyte X58A-UD7
i7 920
Dominators 1600 x6 12GB
6970 2GB
HX850
256GB SSD, Sam 1TB, WDB320GB
Blu-Ray
HAF 932

Gigabyte Z68X-UD5-B3
i7 3770K
Vengeance 1600 16GB
6950 2GB
HCP1200W
Revo Drive x2, 1.5TB WDB RAID0
16x DLRW
StrikeX S7
Full water cooling
3 x 27" Iiy