Official GIGABYTE Forum
  1. Official GIGABYTE Forum
  2. Questions about GIGABYTE products
  3. Motherboards with AMD processors
  4. Raid 1+0
« previous next »
Pages: [1]   Go Down

Raid 1+0

stewwmann

  • 32
  • 2
Raid 1+0
« on: March 06, 2011, 12:55:28 am »
How do I configure raid 1+0 om a ga-890gpa-udh3? I will be useing 4 samsung f3's.
Logged
CM HAF 922, GIGABYTE 890GPA-UD3H Rev 2.0 bios rev FF, PHENOM 2 X6 1090t BE oc3.6,ANTEC TPQ-850W, CORSAIR H70, 60 gb CORSAIR GT ssd,4-320 gb SAMSUNG F4 raid0, 2- GIGABYTE HD6850 crossfire, 4-VENGENCE 9cas 4 gb strips 1600/1.65v running @1333/1.5v 7-7-7-21,Win7 ultimate 64 bit

Tiger

  • 276
  • 13
Re: Raid 1+0
« Reply #1 on: March 07, 2011, 03:43:35 pm »
RAID 1+0 (RAID 10) on a Gigabyte GA-890GPA-UDH3 can be done on the AMD SB850. Assuming you using Windows 7 and a separate boot drive.
Install Windows 7 with SATA Ports set as RAID. Boot hard drive on SATA Port 0 configured in the RAID Utility as Non-RAID hard drive. Install Windows 7 before creating your RAID 10 array.
Link to manual:
http://europe.asrock.com/manual/raid/890GM%20Pro3/English.pdf
Basically you will have configured two RAID 1 mirror arrays then make a single RAID 0 array with the first two RAID 1 arrays. You can use AMD RAIDXpert.
Link to manual:
http://www.asus.ru/ftp/raid/AMD_RAIDXpert_User_v1.0.pdf
Go ahead and download the SB8XX RAID driver for Windows 7. Run the .exe and extract the files to a folder of your choice. Cancel the Catalyst Installer. Look thru the folders for the apps folder. The RAIDXpert software is there.
Link to SB8xx RAID Driver for Windows 7 (77.4 MB) [Listed in Optional Downloads]
http://sites.amd.com/us/game/downloads/Pages/integrated_win7-64.aspx#2
Logged
1) GA-Z97X-Gaming 7, G3258,
2) GA-990FXA-UD3 Rev. 1.1, FX-8350
3) GA-AM1M-S2P, Sempron 3850 Kabini
Pages: [1]   Go Up
« previous next »
  1. Official GIGABYTE Forum
  2. Questions about GIGABYTE products
  3. Motherboards with AMD processors
  4. Raid 1+0