Ok
Right now my settings are ;
9-9-9-27 ---- 1.70V --- memorie multiplier at x12 = 1600 mhz -- uncore ratio at x26 --- QV I/Vtt: 1.36
The other settings as you see on pics at default/auto
Note: OCZ staff msged me before about settings.. wanted me use 8-8-8-24 1.65V set memorie multiplier to 12x and QV I/Vtt: 1.36 but that didnt worked for me. maybe voltage was low bcuz setting 1.65v at bios shows as 1.62 voltage use on programs? also 6 piece rams need a bit more voltage than 1.65v? I didnt try higher voltages... but ocz staff was guaranting me and still very sure about memories can work at 8-8-8-24 and 1.65V
they told me these settings how we test rams and sell them.. they have to work. but they ccouldnt help how on this motherboard and they didnt help
do you think if memoies 8-8-8-24 , they should work better and stable at 9-9-9-27 ? or setting to slower wont help stable? setting 9-9-9-27 slower can cause bluescreen also?