X58A-UD3R REV 1.0 and (3x2GB) OCZ 6GB 1600 MHZ (OCZ3G1600LV6) ''Blue screen''

[Dark Mantis]

Yes I think you can assume that the memory is ok now. That would tend to point the finger at the drivers if there is stilll a problem.

[anexiety]

Hello there;

I got home and started computer  got 4 times bluescreen  called  F4   -   1A  -   7E   and   0A    I have no idea whas going wrong if memories ok ://

[Dark Mantis]

We would really need the stop codes to be of any use. It is like 0x00124 type of thing.

[anexiety]

==================================================
Dump File         : 042011-23977-01.dmp
Crash Time        : 20.04.2011 08:07:03
Bug Check String  : BAD_POOL_HEADER
Bug Check Code    : 0x00000019
Parameter 1       : 00000000`00000020
Parameter 2       : fffff8a0`037e8a50
Parameter 3       : fffff8a0`037e8d60
Parameter 4       : 00000000`0d310206
Caused By Driver  : Npfs.SYS
Caused By Address : Npfs.SYS+633c
File Description  :
Product Name      :
Company           :
File Version      :
Processor         : x64
Computer Name     :
Full Path         : C:\Windows\Minidump\042011-23977-01.dmp
Processors Count  : 8
Major Version     : 15
Minor Version     : 7601
Dump File Size    : 270.432
==================================================

==================================================
Dump File         : 042011-26598-01.dmp
Crash Time        : 20.04.2011 08:02:29
Bug Check String  : SYSTEM_SERVICE_EXCEPTION
Bug Check Code    : 0x0000003b
Parameter 1       : 00000000`c0000005
Parameter 2       : fffff960`002852cc
Parameter 3       : fffff880`04be6b70
Parameter 4       : 00000000`00000000
Caused By Driver  : win32k.sys
Caused By Address : win32k.sys+1e52cc
File Description  :
Product Name      :
Company           :
File Version      :
Processor         : x64
Computer Name     :
Full Path         : C:\Windows\Minidump\042011-26598-01.dmp
Processors Count  : 8
Major Version     : 15
Minor Version     : 7601
Dump File Size    : 270.376
==================================================

==================================================
Dump File         : 041911-33774-01.dmp
Crash Time        : 19.04.2011 16:15:00
Bug Check String  : PAGE_FAULT_IN_NONPAGED_AREA
Bug Check Code    : 0x00000050
Parameter 1       : fffff0a0`03103130
Parameter 2       : 00000000`00000000
Parameter 3       : fffff800`03166903
Parameter 4       : 00000000`00000007
Caused By Driver  : ntoskrnl.exe
Caused By Address : ntoskrnl.exe+80640
File Description  : NT Kernel & System
Product Name      : Microsoft® Windows® Operating System
Company           : Microsoft Corporation
File Version      : 6.1.7601.17514 (win7sp1_rtm.101119-1850)
Processor         : x64
Computer Name     :
Full Path         : C:\Windows\Minidump\041911-33774-01.dmp
Processors Count  : 8
Major Version     : 15
Minor Version     : 7601
Dump File Size    : 274.504
==================================================

==================================================
Dump File         : 041911-25615-01.dmp
Crash Time        : 19.04.2011 01:21:04
Bug Check String  : PAGE_FAULT_IN_NONPAGED_AREA
Bug Check Code    : 0x00000050
Parameter 1       : fffff280`0ad1ecd8
Parameter 2       : 00000000`00000000
Parameter 3       : fffff800`031f4cd5
Parameter 4       : 00000000`00000007
Caused By Driver  : ntoskrnl.exe
Caused By Address : ntoskrnl.exe+80640
File Description  : NT Kernel & System
Product Name      : Microsoft® Windows® Operating System
Company           : Microsoft Corporation
File Version      : 6.1.7601.17514 (win7sp1_rtm.101119-1850)
Processor         : x64
Computer Name     :
Full Path         : C:\Windows\Minidump\041911-25615-01.dmp
Processors Count  : 8
Major Version     : 15
Minor Version     : 7601
Dump File Size    : 271.696
==================================================

from dump program if that helps...

[Dark Mantis]

Well the dumps are showing memory problems still but settings not hardware.

0x00000050 << Incorrect memory timing/freq or uncore multiplier

The only other thing that can cause this is if the pins are bent in the CPU socket so it might be worth checking that first.

Take all the usual anti-static precautions.

Very carefully remove the heatsink and fan. Probably a slight twisting motion is best to release the two as the thermal paste can act like a glue.

Once off remove the CPU taking extreme care both physically and electrically(static) and place somewhere safe.

Make sure that the lighting is very good and even.

Now scrutinise the socket for any pins that are out of alignment, even slightly.
If in any doubt whatsoever take a couple of macro (close up) photos of the socket and post them on here for us to check.

Also look at the bottom of the CPU at the lands (little copper circles) and make sure that there is a mark in each somewhere near the centre.
If there are any missing marks or any of the pins are obviously bent then that is your problem.

Before refitting the CPU clean off all residue of the old thermal paste and the same on the heatsink and then apply a small amount (about the size of a grain of rice) to the centre of the CPU once it is inserted in the socket.

[anexiety]

Hello again 

I already checked CPU socket  2 times , actually 3 times if you count when I was installing cpu first time    I checked very very  carefully with lighting and all.  it was look just perfect. Before I do that again  I wanna try more  QV I/Vtt   Voltages  as  you said   1.20  -  1.45 .   I tryed between  1.20-1.30  no lucky yet.    Right now it setted  1.36  and testing now.  in mean time my new cpu cooler will arrive (cooler master V10)   I will check cpu socket  when installing new cooler  if problem wont solve with voltages. But if you sure  its about bents and not voltages, I will check it tonight after work 

[Dark Mantis]

No leave it until your new cooler comes as there is no point making extra work for you.

For now we can try the settings.

Can you just list what settings you have for the memory at the moment.(Timings, voltages, multiplier, uncore etc)

[anexiety]

Ok  

Right now my settings are ;
9-9-9-27  ----    1.70V     ---    memorie multiplier at x12 =  1600 mhz   --    uncore    ratio at x26  ---  QV I/Vtt: 1.36

The other settings as you see on pics  at default/auto



Note: OCZ staff msged me before  about settings..  wanted me use   8-8-8-24    1.65V     set memorie multiplier to 12x   and   QV I/Vtt: 1.36  but  that didnt worked  for me.  maybe  voltage was low  bcuz setting 1.65v at bios  shows as 1.62 voltage use on programs? also 6 piece rams need a bit more voltage than 1.65v?  I didnt try higher voltages...  but ocz staff was   guaranting me and still very sure about  memories can work at 8-8-8-24  and 1.65V    they told me  these settings how we test rams and sell them.. they have to work.  but they ccouldnt help how on this motherboard and they didnt help

do you think  if memoies 8-8-8-24  , they  should work  better and stable  at 9-9-9-27 ?  or setting to slower wont help stable?  setting 9-9-9-27 slower can cause  bluescreen also?  

[Dark Mantis]

If anything the slower timings of 9-9-9-27 should help stability. If you need to you can even go a little higher than 1.7V for the memory. Try 1.72V if it helps. There is nothing stopping you trying the tighter timings though if you want to 8-8-8-24.

Your Uncore might work at anything from 24 to 26 so that also gives you some room to move.

Your QVI/Vtt is also increasable form the 1.36V that you have it at. You can go to 1.45V at a push.

Up to you now to play around with the settings and try and get them stable. Good luck.

[anexiety]

Hey 

9-9-9-27  ----    1.70V     ---    memorie multiplier at x12 =  1600 mhz   --    uncore  ratio at x26  ---  QV I/Vtt: 1.36


Got another bluescreen with this  settings.  Error called 'MEMORIE_MANAGEGMENT''    code:0x0000001A     

what does it mean?  is it about  increase   QV I/Vtt  ?   or?

[Dark Mantis]

It is basically saying that the memory controller crashed.

[anexiety]

It is basically saying that the memory controller crashed.

So you mean  problem in CPU socket?

[anexiety]

I tryed   9-9-9-27  ----    1.70V     ---    memorie multiplier at x12 =  1600 mhz   --    uncore  ratio at x26  ---  QV I/Vtt: 1.46

changed  QV I/Vtt: 1.46   from  1.36

got another bluescreen   ''APC_INDEX_MISSMATCH''      code: 0x00000001            

[Dark Mantis]

Well it is a corrupt registry entry that usually causes that (maybe corrupted by memory faults) and I have found a program you can run to help track it down and fix it.

 
To Fix (0x00000001) error you need to follow the steps below:
 
Step 1:
   
Download (0x00000001) Repair Tool
   
Step 2:
   
Click the "Scan" button
   
Step 3:
   
Click 'Fix All' and you're done!

[anexiety]

Ok Dark , doing this  right now    we will see