Cloud OC utlity not working properly on P67A-UD7...

[Earthdog]

Well, this seems like the best place to get this help so here goes...

System:

i7 2600k
Giga P67A-UD7-B3 with F2 and F3 bios (tried both, currently on F3)
Supertalent DDR3 2k ram @ 1600Mhz
Seasonic X750 PSU
Nvidia 560ti
W7 Pro 64 bit

That should be all the relevent information you need.


My problem is that when I try to use the Cloud OC utility to overclock my PC, the only item I am able to change is the memory multiplier. No bclk,  no multi (even with adjust on the fly enabled), no nothing on the top half. However all voltages I can change. ET6 works just fine.

Please advise.

Thanks giga!

[Dark Mantis]

Hi

I really don't know but I would think that it is because the P67 boards are not tuned to work with Cloud OC yet. You could try asking GGTS for confirmation.

Just enter your email address and click on the language of choice.
GGTS   http://ggts.gigabyte.com/

[Earthdog]

Thanks for the link, I will try that too.

Thing is, someone else with a gigabyte is using it just fine on P67 I believe so it should work with mine...

[Dark Mantis]

Have you got the latest version of Cloud OC ?

[Earthdog]

Yep!

[Dark Mantis]

I take it that you haven't got your BIOS password protected ?

[Earthdog]

Correct. Bios is not PW protected, I can just jump right on in and edit in the bios and Easytune (well to be honest I havent tried ET, but I can select the item vs Cloud OC where its not a choice).

[Dark Mantis]

Try uninstalling EasyTune and see if that makes a difference. Often these things clash when installed together.

[Earthdog]

Well, I uninstalled ET6 and now both memory and CPU multi are available to change, but nothing else in that section.

EDIT: Well interesting. After the reboot, Im back to memory multi only...

Next!  

EDIT2: And now when I switch tabs and come back to Tuner, the cpu and mem multi are available to change, but nothing else in that section...

[Dark Mantis]

I really don't know where to go next but if you have any more of the bundled programs installed I would clean them off the system.

[Earthdog]

I have nothing else installed from Gigabyte or any other MFG for that matter like that. I will try a reinstall of the Cloud and see if that works...

Does anyone else use this stuff on this board or any other giga board that can chime in and assist?

[Dark Mantis]

To be fair I have tried it out only and it seemed to work fine apart from introducing  some latency into the system if left loaded.

[Earthdog]

No worries. And thank you for your input. Im just hoping someone that has used this software, and on my board, will chime in with help... If not someone from giga (do they watch these forums?).

[Dark Mantis]

Not really. You would need to contact GGTS for official technical help.

Just enter your email address and click on the language of choice.
GGTS   http://ggts.gigabyte.com/

I don't have your exact board or CPU but I can try it with my P67A-UD5 and i5 - 2500K.

[Earthdog]

Give it a try if you can... sure!

I have sent support an email (monday) and have not heard back yet...

CORRECTION, I sent it yesterday morning.

Question - 1075991