Official GIGABYTE Forum
  1. Official GIGABYTE Forum
  2. Questions about GIGABYTE products
  3. Motherboards with Intel processors
  4. GA-P67A-UD7 B3 VOLTAGE
« previous next »
Pages: [1] 2   Go Down

GA-P67A-UD7 B3 VOLTAGE

genoaole

  • 25
  • 0
GA-P67A-UD7 B3 VOLTAGE
« on: May 08, 2011, 12:49:06 pm »


Voltage on 3.3 and 5 are not normal...
I have bad assembly my pc or........
The post led mark 00 after boot.... 
Logged

Dark Mantis

  • *
  • 18405
  • 414
  • 10typesofpeopleoneswhoknow binaryandoneswhodont
    • Dark Mantis
Re: GA-P67A-UD7 B3 VOLTAGE
« Reply #1 on: May 08, 2011, 02:54:53 pm »
Hi you don't give us much to go on the be honest but does your system run properly or not ?

Is the reporting software the latest version ?
Logged
Gigabyte X58A-UD7
i7 920
Dominators 1600 x6 12GB
6970 2GB
HX850
256GB SSD, Sam 1TB, WDB320GB
Blu-Ray
HAF 932

Gigabyte Z68X-UD5-B3
i7 3770K
Vengeance 1600 16GB
6950 2GB
HCP1200W
Revo Drive x2, 1.5TB WDB RAID0
16x DLRW
StrikeX S7
Full water cooling
3 x 27" Iiy

genoaole

  • 25
  • 0
Re: GA-P67A-UD7 B3 VOLTAGE
« Reply #2 on: May 08, 2011, 03:06:27 pm »
Yes sistem work fine, version is up to date, but another program record this
.
Logged

Dark Mantis

  • *
  • 18405
  • 414
  • 10typesofpeopleoneswhoknow binaryandoneswhodont
    • Dark Mantis
Re: GA-P67A-UD7 B3 VOLTAGE
« Reply #3 on: May 08, 2011, 05:00:27 pm »
If your system is running fine then don't worry. Often the problem is that the software reports things wrongly. More often than not this is because of out of date programs.
Logged
Gigabyte X58A-UD7
i7 920
Dominators 1600 x6 12GB
6970 2GB
HX850
256GB SSD, Sam 1TB, WDB320GB
Blu-Ray
HAF 932

Gigabyte Z68X-UD5-B3
i7 3770K
Vengeance 1600 16GB
6950 2GB
HCP1200W
Revo Drive x2, 1.5TB WDB RAID0
16x DLRW
StrikeX S7
Full water cooling
3 x 27" Iiy

genoaole

  • 25
  • 0
Re: GA-P67A-UD7 B3 VOLTAGE
« Reply #4 on: May 08, 2011, 09:20:53 pm »
And 00 in post led display???? during windows logo is ff but after ready change in 00
Logged

Dark Mantis

  • *
  • 18405
  • 414
  • 10typesofpeopleoneswhoknow binaryandoneswhodont
    • Dark Mantis
Re: GA-P67A-UD7 B3 VOLTAGE
« Reply #5 on: May 08, 2011, 10:33:24 pm »
I have just checked up with Lsdmeasap's LED Debug Codes and this is what it says:

00
Your in the BIOS right now, if you cant see the BIOS cause your Display stays black, please check the description for POST Code 2b. If this is part of a loop please check the point "E8 -> 01 -> b2 -> 00 looping" above.

« Last Edit: May 08, 2011, 10:41:24 pm by Dark Mantis »
Logged
Gigabyte X58A-UD7
i7 920
Dominators 1600 x6 12GB
6970 2GB
HX850
256GB SSD, Sam 1TB, WDB320GB
Blu-Ray
HAF 932

Gigabyte Z68X-UD5-B3
i7 3770K
Vengeance 1600 16GB
6950 2GB
HCP1200W
Revo Drive x2, 1.5TB WDB RAID0
16x DLRW
StrikeX S7
Full water cooling
3 x 27" Iiy

genoaole

  • 25
  • 0
Re: GA-P67A-UD7 B3 VOLTAGE
« Reply #6 on: May 08, 2011, 10:51:27 pm »
Hhm sorry but in user's manual not exist that codes...

Where i found that??
Logged

genoaole

  • 25
  • 0
Re: GA-P67A-UD7 B3 VOLTAGE
« Reply #7 on: May 08, 2011, 11:07:34 pm »
In bios the post led show 75.... connecting and detecting ide devices... 
 During boot more number rotate on display!!!!!
At moment of windows logo is ff and when  ready to work change in 00..
In the manual found only FF
Logged

F5BJR

  • 478
  • 31
Re: GA-P67A-UD7 B3 VOLTAGE
« Reply #8 on: May 08, 2011, 11:12:32 pm »
*
For the voltages you have in the BIOS an option :

--> PC Health Status

Pierre

Logged
GA-X58A-UD5 I7 930
6x2Go KINGSTON 9905403-084
ENERMAX Modu 82+
Sharkoon REBEL12
2*HD5770SingleSlot+PCI-HD4350
2xSENSY 26'
2xBOX 5HD HotPlug
3xBOX 34HD MaxinPower
2x AD4SR5HPMU Addonics 8x1ToWDGreen 
4x 1TO RAID10 ICH10+1 BACKUP OS
2 * RR622 HighPoint
Sata 88SX7042  
AverMedia H727

genoaole

  • 25
  • 0
Re: GA-P67A-UD7 B3 VOLTAGE
« Reply #9 on: May 09, 2011, 08:20:48 pm »
In bios pc healt status is ok. but the post 00 is?
Logged

F5BJR

  • 478
  • 31
Re: GA-P67A-UD7 B3 VOLTAGE
« Reply #10 on: May 09, 2011, 09:26:05 pm »
Logged
GA-X58A-UD5 I7 930
6x2Go KINGSTON 9905403-084
ENERMAX Modu 82+
Sharkoon REBEL12
2*HD5770SingleSlot+PCI-HD4350
2xSENSY 26'
2xBOX 5HD HotPlug
3xBOX 34HD MaxinPower
2x AD4SR5HPMU Addonics 8x1ToWDGreen 
4x 1TO RAID10 ICH10+1 BACKUP OS
2 * RR622 HighPoint
Sata 88SX7042  
AverMedia H727

Dark Mantis

  • *
  • 18405
  • 414
  • 10typesofpeopleoneswhoknow binaryandoneswhodont
    • Dark Mantis
Re: GA-P67A-UD7 B3 VOLTAGE
« Reply #11 on: May 10, 2011, 09:13:21 am »
Well even though your system seems to be working alright the motherboard is picking up some problem there. It could be a faulty processor as the 00 code suggests or it could be the board itself is faulty and that is why the code is being displayed.
Logged
Gigabyte X58A-UD7
i7 920
Dominators 1600 x6 12GB
6970 2GB
HX850
256GB SSD, Sam 1TB, WDB320GB
Blu-Ray
HAF 932

Gigabyte Z68X-UD5-B3
i7 3770K
Vengeance 1600 16GB
6950 2GB
HCP1200W
Revo Drive x2, 1.5TB WDB RAID0
16x DLRW
StrikeX S7
Full water cooling
3 x 27" Iiy

genoaole

  • 25
  • 0
Re: GA-P67A-UD7 B3 VOLTAGE
« Reply #12 on: May 10, 2011, 10:52:40 pm »
mmmmhhhhhh. this inquiete me.... no problem with major bench software, no problem with game, no problem with nothing... prime95 run for 8 hours with no problem......    ???  ???  ???  ???  ???
Logged

Dark Mantis

  • *
  • 18405
  • 414
  • 10typesofpeopleoneswhoknow binaryandoneswhodont
    • Dark Mantis
Re: GA-P67A-UD7 B3 VOLTAGE
« Reply #13 on: May 11, 2011, 10:06:29 pm »
Maybe then it is purely a problem with the BIOS code. Try using a different BIOS and see if the problem remains.
Logged
Gigabyte X58A-UD7
i7 920
Dominators 1600 x6 12GB
6970 2GB
HX850
256GB SSD, Sam 1TB, WDB320GB
Blu-Ray
HAF 932

Gigabyte Z68X-UD5-B3
i7 3770K
Vengeance 1600 16GB
6950 2GB
HCP1200W
Revo Drive x2, 1.5TB WDB RAID0
16x DLRW
StrikeX S7
Full water cooling
3 x 27" Iiy

genoaole

  • 25
  • 0
Re: GA-P67A-UD7 B3 VOLTAGE
« Reply #14 on: May 11, 2011, 10:30:50 pm »
If gigabyte release bios f4  ;D !!!!!!
Logged
Pages: [1] 2   Go Up
« previous next »
  1. Official GIGABYTE Forum
  2. Questions about GIGABYTE products
  3. Motherboards with Intel processors
  4. GA-P67A-UD7 B3 VOLTAGE